SSD benchmark check

[Dainslaif]

After seeing another member post his numbers (http://forums.anandtech.com/showthread.php?t=2210472) I decided to install the popular SSD benchmarks and check my own.

Intel 510 120GB SSD on an Intel DP67BGB (P67 chipset) board with an i7 2600k processor.

Everything seems to be higher (as it should since they're on a 320) except the 4K QD32 read, which is quite a bit lower than the other user's. Is this something I should be concerned about, or any idea why it'd be so low? AHCI is enabled and I just ran a trim.

Cheers.

 

[pinkfloyd48]

---------Heres Mine
--------------------------------------------------------------
CrystalDiskMark 3.0.1 x64 (C) 2007-2010 hiyohiyo
Crystal Dew World : http://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 byte/s [SATA/300 = 300,000,000 byte/s]

Sequential Read : 462.403 MB/s
Sequential Write : 286.967 MB/s
Random Read 512KB : 257.115 MB/s
Random Write 512KB : 315.637 MB/s
Random Read 4KB (QD=1) : 26.023 MB/s [ 6353.2 IOPS]
Random Write 4KB (QD=1) : 108.609 MB/s [ 26515.8 IOPS]
Random Read 4KB (QD=32) : 217.376 MB/s [ 53070.2 IOPS]
Random Write 4KB (QD=32) : 119.175 MB/s [ 29095.3 IOPS]

Test : 1000 MB [C: 43.8% (52.2/119.1 GB)] (x5)
Date : 2011/12/05 8:13:32
OS : Windows 7 Ultimate Edition SP1 [6.1 Build 7601] (x64)

 

[Dainslaif]

Yea, that's a pretty significant difference on the 4k. Did you do any tweaks?

 

[Makaveli]

I think the difference is just the drive intel gave up alittle random read speed that the previous G2 series had for increased sequential numbers in the newer drive. Probably because people kept wetting their pants at the benchmarks numbers they were seeing with the vertex 3.

Marvel controller vs Intel controller to sum it all up.