Something different from Enermax

[NumbaJuan]

can't makeup my mind if i like it or not Try this link

 

[NumbaJuan]

sorry, not the right link. i'll try latter :wine: :beer:

 

[Dan]

The link works for me, so here's a bump.

 

[Ziptar]

Sure, go for it.... If you have $335 to blow on a case.. You can afford to like it and You deserve it.....

 

[ShinSa]

Looks identical to kingwin cases.
newegg

 

[theNEOone]

Originally posted by: Ziptar
Sure, go for it.... If you have $335 to blow on a case.. You can afford to like it and You deserve it.....

wtf!!!!


that case is definitely not worth $335

 

[deerslayer]

Originally posted by: theNEOone

Originally posted by: Ziptar
Sure, go for it.... If you have $335 to blow on a case.. You can afford to like it and You deserve it.....

wtf!!!!


that case is definitely not worth $335

I sure wouldn't pay $335 for it!

 

[S0me1X]

I think that particular Enermax is overkill, too many side fan mounts.

Personally, I'd get the AMS gTower or the Kingwin. Both costs around $160 and look pretty similiar to the Enermax.

 

[EeyoreX]

Since they are all about the same case you could get one of these from Directron for 109. Brand is SuperFlower, but I think they are probably all just rebranded anyhow. I had this case for about 6 months before the Kingwin versions showed up. Personally, I love this case. Directron has them in several colors.

\Dan

 

[OulOat]

Originally posted by: EeyoreX
Since they are all about the same case you could get one of these from Directron for 109. Brand is SuperFlower, but I think they are probably all just rebranded anyhow. I had this case for about 6 months before the Kingwin versions showed up. Personally, I love this case. Directron has them in several colors.

\Dan

It's discontinued and no longer available.

 

[screw3d]

Model No.
CS-5189AL-00/CS-5189AL-03
TYPE Aluminum Case with Acrylic Panel
THICKNESS 2.0mm
MAINBOARD ATX ; Pentium 4 M/B ,12"x9.6"
POWER SUPPLY ATX
5.25" DRIVE BAYS 4
3.5" DRIVE BAYS 3
3.5" HIDDEN 3
Cooling Fan Standard:1x8cm (at front) + 2 x 6cm (at back)
+ 1x8cm+1x12cm on side mounting bracket.
I/O Interface at front side USB, IEEE1394, Audio in/out, Volume tunner Game port
Dimensions (DxWxH) 510 x 200 x 420 mm

No kidding..2.0mm !!

 

[Blurry]

No kidding..2.0mm !!

Bullet-Proof Case

Seriously though, that case is not worth it at all.
The Kingwin cases (looks exactly the same, but not as thick) are nearly 2X cheaper than the Enermax

 

[ShinSa]

Originally posted by: OulOat

Originally posted by: EeyoreX
Since they are all about the same case you could get one of these from Directron for 109. Brand is SuperFlower, but I think they are probably all just rebranded anyhow. I had this case for about 6 months before the Kingwin versions showed up. Personally, I love this case. Directron has them in several colors.

\Dan

It's discontinued and no longer available.

Here's one at same price with windows.

I never get good replies

 

[isaacmacdonald]

If I was going to get a new case, I'd go small form factor. They're sexy.

 

[OulOat]

Originally posted by: ShinSa

Originally posted by: OulOat

Originally posted by: EeyoreX
Since they are all about the same case you could get one of these from Directron for 109. Brand is SuperFlower, but I think they are probably all just rebranded anyhow. I had this case for about 6 months before the Kingwin versions showed up. Personally, I love this case. Directron has them in several colors.

\Dan

It's discontinued and no longer available.

Here's one at same price with windows.

I never get good replies

Eh, my friend got the black one. It's pretty, but terrible front bezel design. The air holes gives the illusion that the front fans can easily get air, instead there is a metal plate in between the acrylic and the front fans.

 

[EeyoreX]

It's discontinued and no longer available.

Bummer, didn't see that. My bad.

Eh, my friend got the black one. It's pretty, but terrible front bezel design. The air holes gives the illusion that the front fans can easily get air, instead there is a metal plate in between the acrylic and the front fans.

The metal plate has the same configuration of holes as the acrylic, so I am not sure how that changes the amount of air getting though.

\Dan