Someone have jumpers settings for a MS 6905 Ver 1.1 Slotket

[Tominator]

Trying to upgrade a friends comp and have not been ablet to determine the settings for 100mhz.

Working with a Celery 366btw.

Thanks!

 

[Tominator]

Sorry for the double post and bump......Still a little dopey from surgery...😱

 

[imported_PHarmer]

http://www.msi.com.tw/support/manual/peripheral.htm

Copy and paste the above link.

 

[Tominator]

I think that is for a newer version of the slotket. I emailed him the .pdf and told him to compare the jumpers.

 

[Tominator]

Still looking.....Version 1.1 jumpers are not the same as those shown on the site....🙁

 

[SKORPI0]

Celeron 366 Mhz (Vcc for processor core = 2.00 V; This processor's system bus operates at 66 MHz only ).

Here what my MS-6905 V1.1 shows, on the box and as stenciled on the PC board (Vcore settings only)


Settings for 100 Mhz..... Overclocking jumper ; what 554.5454 MHz ?????
----------------------------------------------------------------------------------------------------


J1 - open J2 - 2-3


Vcore settings for 2.0 V - these are the ones with red jumpers
-----------------------------

JV4 2-3
JV3 2-3
JV2 2-3
JV1 2-3
JV0 NC (no connection)

Note: THis jumper should always be set to Auto by default. We do not guarantee that the mainboard, CPU, or other components will function properly when the voltage is manually set.


Single processor
----------------------


J3 - open



Tell me if it works!!!!! 😉

 

[Tominator]

Yahoo!

Thanks! Exactly what I was looking for.....I'll email my friend in Indianaplois and hopefully he can try those settings....I'll be back..😎