• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Soldering iron help.

highland145

highland145

Lifer
Bought the kid a Ramsey escape robot kit. Have to solder the resisters, caps, etc to the circuit board. My Weller 8200 isn't going to do the job. Looking on Amazon, there are varying wattages for the small tipped irons. Any ideas what the appropriate watts for this is? Suggestions on other brands are welcome too.

Thanks.
 
When working with electronic components, I don't go above 15W. You can get adjustable wattage irons as well.
 
http://www.radioshack.com/product/in...odsInSession=1
or
http://www.radioshack.com/product/in...odsInSession=1
and replace with a conical tip. I hate chisel tips myself. 15W should be plenty, but nice to have the 30W option. Looks all through hole stuff so it'll be nice and easy.

This is the best solder for most instances IMHO. (That is the best available at radio shack) - no extra flux is typically needed. I like using a brush with 99% isopropyl to clean off the burned rosin after soldering.
 
twinrider1 said:
If you're going to be doing any regular soldering, I'd recommend spending a little extra. Get the Hakko FX-888. To your door for $81... http://www.kimcodistributing.com/store/item.asp?ITEM_ID=2943&DEPARTMENT_ID=439

It's not an absolute necessity, but it sure makes soldering more pleasant.
Click to expand...

Hakko makes real, real, REAL good shit. We used their line in production at an electronics manufacturer. Excellent performance, on 8 hours a day non-stop soldering work. Loved it, and the ones I linked before aren't "bad", they are just not as well made as Hakko.
 
bobdole369 said:
Hakko makes real, real, REAL good shit. We used their line in production at an electronics manufacturer. Excellent performance, on 8 hours a day non-stop soldering work. Loved it, and the ones I linked before aren't "bad", they are just not as well made as Hakko.
Click to expand...
If I knew he'd love it and want to do more, I'd go with the Hakko (and may still). If it's a one and done the RS are fine. Thanks again.

Edit: The Hakko is temp scaled. How does that translate to watts? Not wanting to burn up the components.
 
Last edited:
Temp control is what you want on a workstation. Poor soldering technique, not watts is what burns up sensitive components. 😉
 
It's always good to have spare (extras) on hand.
Also practice makes perfect - or almost. 😉
Find some old boards/parts to learn on. Definitely helps.
 
I've never fried a part but I am usually working with vintage or hard to find parts like germanium transistors and diodes or out-of-manufacture ICs and would rather not tempt fate. Then again I usually socket those parts to minimize the risk in the first place.
 
highland145 said:
Bought the kid a Ramsey escape robot kit. Have to solder the resisters, caps, etc to the circuit board. My Weller 8200 isn't going to do the job. Looking on Amazon, there are varying wattages for the small tipped irons. Any ideas what the appropriate watts for this is? Suggestions on other brands are welcome too.

Thanks.
Click to expand...




Was this a present for your kid ... for you ... or for both?


I remember my last soldering project years ago. My Dad came over and was enthralled as I integrated all of the components onto the board. Those were the days ...
 
dud said:
Was this a present for your kid ... for you ... or for both?


I remember my last soldering project years ago. My Dad came over and was enthralled as I integrated all of the components onto the board. Those were the days ...
Click to expand...
Mostly for him. Trying to get him interested in orther things. We took apart some dead electronics a couple of months back and he couldn't believe how it worked. It was like magic to him. And the little I remembered from electronics classes 25 years ago was embarrassing.
 
I got a metcal in 06. Have not looked back since.

Also, practice, practice, practice. On my 2nd internship, I worked with a guy who would not let me leave until i successfully soldered a surface mount resistor. took me an hour and a few resistors to do it.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top