slk900u and 92mm fans

th3Godfather

Member
Sep 14, 2003
43
0
0
well i just upgraded my fan from an 80mm smart fan 2 to an enermax 92mm. my question is how in gods name do you get the metal things to hold the fan in place? i stretched them to their limits and they will not fit on the top of the friggin thing. right now its jimmy rigged with electrical tape, but i would definately prefer to get this stupid thing on there w/o tape. are there any other way to mount the fan besides these wires?
 

shikhan

Senior member
Mar 15, 2001
834
0
71
I had this problem at first too. Make sure you're using the largest set of clips (should have come with three sets). I believe mine sits in the middle set of holes, i think.
 

Peter D

Diamond Member
Oct 28, 2002
3,603
0
0
Make sure you have the biggest set of clips, also make sure you're using the right holes... :confused: If you're doing it right, there should be some resistance when you try to pull the clips onto the fan, but they should fit snuggly with the little 'V' bends in the clip sitting into the corner mounting holes of the fan. Once done correctly, its extremely strong :)