Here are my system specs.
- Abit KT7A raid mobo
- Duron 800mhz
- 256 mb of crucial sdram at cas2 and pc133
- Voodoo 3 2000 pci video card
- Sound blaster 16 isa sound card
- Maxtor 45 gig, 7200 rpm, < 8.7 access time, ATA 100, and has three 15 gig platters.
- Two speakers which hang on the each side of the montior
- HP 9110i 8x 4x 32x CD-RW
- Plextor 24x 10x 40x CD-RW
- A plain full tower case which isnt anything special. Its a ok case. Was $60 and came with a 300 watt power supply. It has Six 5 1/2 bays, 2 external 3 1/2, and 4 internal 3 1/2 bays. No slide out mobo tray but the mobo can come downward out of the case side ways but its still connected to the case so its not exactly the same thing.
- 300 watt deer power supply
- floppy drive which is missing the front but not sure if i can find one to fit the front of it sense its out of a old packard bell computer. Dum packard bell had to have a floppy drive like this.
- Dlink DFE 530 TX + 10/100Mbps ethernet card
- Stock fan and heatsink on my duron 800mhz
- 14 inch Proview montior.
- Lexmark Z22 printer
- Three Suson case fans with 1 intake fan in the front and 2 outtake fans in the back above the power supply.
- Abit KT7A raid mobo
- Duron 800mhz
- 256 mb of crucial sdram at cas2 and pc133
- Voodoo 3 2000 pci video card
- Sound blaster 16 isa sound card
- Maxtor 45 gig, 7200 rpm, < 8.7 access time, ATA 100, and has three 15 gig platters.
- Two speakers which hang on the each side of the montior
- HP 9110i 8x 4x 32x CD-RW
- Plextor 24x 10x 40x CD-RW
- A plain full tower case which isnt anything special. Its a ok case. Was $60 and came with a 300 watt power supply. It has Six 5 1/2 bays, 2 external 3 1/2, and 4 internal 3 1/2 bays. No slide out mobo tray but the mobo can come downward out of the case side ways but its still connected to the case so its not exactly the same thing.
- 300 watt deer power supply
- floppy drive which is missing the front but not sure if i can find one to fit the front of it sense its out of a old packard bell computer. Dum packard bell had to have a floppy drive like this.
- Dlink DFE 530 TX + 10/100Mbps ethernet card
- Stock fan and heatsink on my duron 800mhz
- 14 inch Proview montior.
- Lexmark Z22 printer
- Three Suson case fans with 1 intake fan in the front and 2 outtake fans in the back above the power supply.
