SETI Driver Prob

[Niege]

I'm setting up a rig to run CLI and SETI Driver. Now, I've done this before - many moons ago - but somehow I can't get it to do it again. I've followed the instructions yet.... When I set "Desired Cache Size" to "1", the program doesn't hold the "1" but reverts it to "0" when I try to click on anything else. So, I can't get intialized and set up. Need help. Thanks.

 

[RaySun2Be]

Have you tried using 2 or 3? After entering the cache size, click on the SAVE CONFIG button, exit, then re-enter and see if it saved the setup information.

 

[Niege]

Thanks, Ray, but no luck. No matter what number I try to change the Cache size to, as soon as I click on anything else it reverts to zero. I think I'll try to download a different copy and see if that works, though I have my doubts.

 

[Niege]

Okay... I'm not too swift, it took me a while to identify the problem: it's a permission thing with W2K Pro. When I am logged in as Administrator I can change the cache the cache size. When I am logged in as a user I can't.

Unfortunately my permission experience is limited and I don't know the answer. Any W2K guys out there who could help? I logged in as Administrator (with the Network Administrator's okay) and set the permissions for the CLI and SETI Driver so that Power Users, and myself as a local user could have full control over the programs. However.... when I log back in as myself as a local user I can't change the cache size and the programs won't run. Help!

 

[RaySun2Be]

As an admin, check the permissions on the folder the SETI CLI and SETIDRIVER are located, and make sure your USER has write/modify permissions to that folder.

 

[Niege]

Thanks Ray! That was it, and I get to learn a bit more. Maybe even enough to be dangerous!

 

[RaySun2Be]