Samsung 950p

[tjll11a]

I purchased this moniter about a week ago from staples but threw away the box already and was curious if anyone has seen this before.


The moniter sometimes does this little blink or flicker or something. Don't know what to really call it.


Its currently connected to my ati radeon 32 ddr on a epox 8k7a running about 1400mhz at a resolution of 1280x1024 85mhz. Books says this res should be fine.


Just curious if anyone else owns a moniter that does a little flicker blink thing every once in awhile.



Thanks
Jason

 

[Balt]

I have one, but I've never had that problem before.

It's possible you got one that is defective, or it could be interference or something.

 

[tjll11a]

if i put speakers next to the moniter can that casue this. I mean there labtec computer speakers so they shouldn't...


I guess i'll just have to try it


Thanks
Jason

 

[Bakwetu]

I had this flickering with my G400 card- a known malfunction of some of the g400 16 mb cards. So your graphic card might be causing it. If the flickering wasn't there before you got your monitor it must be something else. Check that everything is properly connected first and you could also check that you have spread spectrum enabled in the bios. Enabling it might lead to you not being able to fsb overclock as much though.

 

[tjll11a]

I will try enableing it, its currently disable right now. My fsb is currently at 135 so it should be to bad with a pci at 1/4.


Thanks
Jason

I'll let you know what happens

 

[watdahel]

lower the refresh rate until no blinking occurs

 

[tjll11a]

Been running with spread spectrum enable and haven't seen anything yet so that could be the fix.


Thanks Bakwetu
Jason