Safe Temps?

[arcenite]

I originally had my 1700+ B system running at 10x210 (2100Mhz) but due to stability issues (which I think were due to the 210mhz bus), I changed the numbers around to be 10.5x200Mhz to get 2100Mhz. I noticed about a 4c temperature increase (39c idle 46 load) are these temperatures safe? Will these numbers greatly reduce the lifetime of my chip? Should I go down to 10x200Mhz? Thanks 🙂

Bill

edit: rig is below

 

[boyRacer]

Without knowing how your case is setup with fans... 46c load sounds fine. 🙂 What voltage are you running?

 

[arcenite]

Look at my rig pictures for fan setup 🙂 CPU is volted @ 1.8v

Bill

 

[arcenite]

you can't see it, but I have two intake fans too... case temp is ~ 28c

Bill

 

[DeRusto]

those temps are just fine...dont worry about it😛

 

[arcenite]

thank you ;-)

Bill