s2466n-4m Tyan tiger

[damuddy]

I placed a jumper on pin j95, lost my lan connection. How do i fix it. Also boards ubs connecter has 10 pin,case cable has 9 pin 1 plugged. how do i connect it.

 

[Peter]

Welcome!

Erm, reading the manual might be a start? If you've lost it, it's downloadable from www.tyan.com

Careful with the USB connector - you need to be 100 percent sure the pinout matches, else you'll fry something.

 

[damuddy]

I have read the manual several times,nothing is mentioned about this .I have emailed tyan about it ,i havent recieved a reply yet.

 

[hans007]

Originally posted by: damuddy
I placed a jumper on pin j95, lost my lan connection. How do i fix it. Also boards ubs connecter has 10 pin,case cable has 9 pin 1 plugged. how do i connect it.

the usb cable setup is usually fairly standard.

i'm sure that is in the manual, a lot of cases the 10 pins are mounted together in one block.


um, if you place the pin on j95 and lost your lan connection, um wouldnt it make sense to remove the jumper?