Running rough

[bruceb]

This info is from this link: http://www.camaros.net/forums/18-engine/138809-adjusting-3-4-v6-valves.html
and also see the info in post #2 at this link: http://www.60degreev6.com/vb5/forum...aintenance/19673-stupid-3-4l-valve-adjustment

 

[Easter]

This info is from this link: http://www.camaros.net/forums/18-engine/138809-adjusting-3-4-v6-valves.html
and also see the info in post #2 at this link: http://www.60degreev6.com/vb5/forum...aintenance/19673-stupid-3-4l-valve-adjustment

 

[Easter]

Which valve is intake and which is exhaust. Don't look like number five is right but don't know which is exhaust and intake thanks

 

[Easter]

Well I got them adjusted and bottom intake back on. Hope I did it right. I think I did. I let you know when I go to start it. Thank you very much for all your help. Couldn't have done it without you.

 

[Easter]

I do have one more question. When I put air intake back on, should I use sealer. Wasn't none on there when I tore it down and can't seem to find out thru google.

 

[JCH13]

No, you don't need RTV or some other sealant on the intake. A very light coating of grease oil (super light, like a drop spread out with your finger) can be helpful to keep rubber/plastic from sticking together though.