Rosetta@Home

[mab58]

Originally posted by: BlackMountainCow
Mab58, I'm one of the cows here at TA and if you talk about a stampeed, then you leave nothing to the TA cows but to do some sneaky "tip the cow" attacks on DPC! 😉

That's allright, we can live, uh I mean stampede with that 😀

Originally posted by: TAandy
Mab58,
Just noticed you're a new member,
Many welcomes to the mad-house 😀 😀 :beer: :wine:

Edit:
PS;
I'm not a cow,
I'm a Human Being 😀 😀 😀

Well, we do not all have had a choice, but there's nothing wrong with human beings :beer:

 

[TAandy]

Originally posted by: Insidious
Ahhhh, cow tipping

We sing songs about it here!

-Sid

Rare for me please.... I like a little Moo with my potatoes!

Tried to do a bit of Cow Tipping myself in the past, nearly got arrested for it 😱
JOKE 😀 😀 😀
Damn these mods 🙂

 

[TAandy]

Originally posted by: mab58

Originally posted by: BlackMountainCow
Mab58, I'm one of the cows here at TA and if you talk about a stampeed, then you leave nothing to the TA cows but to do some sneaky "tip the cow" attacks on DPC! 😉

That's allright, we can live, uh I mean stampede with that 😀

Originally posted by: TAandy
Mab58,
Just noticed you're a new member,
Many welcomes to the mad-house 😀 😀 :beer: :wine:

Edit:
PS;
I'm not a cow,
I'm a Human Being 😀 😀 😀

Well, we do not all have had a choice, but there's nothing wrong with human beings :beer:

Oh, lippy, you'll do us 😀 😀
Just what we need :beer:
Think I'll give up here!

 

[TAandy]

Originally posted by: Bok7575

Originally posted by: Insidious
Sounds GREAT!

I am on the 5.3.1 client (shhhhh... don't tell :roll: )

Sounds like maybe I can take a shortcut and beg you for your bios settings.

I can adjust FSB (I assume this is the same thing as LDT on the DFI boards) and I can adjust memory (200, 166, etc...) and I can adjust HT multiplier and CPU multiplier (10 or less)

I read the overclocking toutorial thread and I think I understand it (assuming my "maximum memory speed adjustment" is the divider they talk about and FSB is the same thing as LDT.

my motherboard is the MSI K8N NEO2 -F

TIA

-Sid

PS: Right now I am running at Tcore ~57, but the Artic Silver 3 hasn't had time to "cure" so assume in a couple days or so I'll be around 55 as is.

I haven't got an MSI (3 Asus, 2 Epox and one DFI) but as for BIOS settings, drop the memory multiplier down (assuming PC3200 here) to 166/333 and then increase FSB. Do a search for clockgen and install that, it allows you to increase FSB from within windows (assuming windows here). AS you increase FSB, the memory clock will increase too to get back close to 200, otherwise the memory would limit you. I'd also drop HTT down to 3x. Mind 57C sounds a bit high. My opteron 165@2.6 is only at 47C under load, with AS5 on.

Trux clients are pretty good, if you are using 5.3.1 I'm guessing that's what these are.

Hope that helps.

Bok

What the hell are you talking about 😕 😕

 

[Insidious]

Originally posted by: Bok7575
I haven't got an MSI (3 Asus, 2 Epox and one DFI) but as for BIOS settings, drop the memory multiplier down (assuming PC3200 here) to 166/333 and then increase FSB. Do a search for clockgen and install that, it allows you to increase FSB from within windows (assuming windows here). AS you increase FSB, the memory clock will increase too to get back close to 200, otherwise the memory would limit you. I'd also drop HTT down to 3x. Mind 57C sounds a bit high. My opteron 165@2.6 is only at 47C under load, with AS5 on.

Trux clients are pretty good, if you are using 5.3.1 I'm guessing that's what these are.

Hope that helps.

Bok

Yesiree it helps A LOT!

Thanks :beer:

 

[TAandy]

Originally posted by: Insidious

Originally posted by: Bok7575
I haven't got an MSI (3 Asus, 2 Epox and one DFI) but as for BIOS settings, drop the memory multiplier down (assuming PC3200 here) to 166/333 and then increase FSB. Do a search for clockgen and install that, it allows you to increase FSB from within windows (assuming windows here). AS you increase FSB, the memory clock will increase too to get back close to 200, otherwise the memory would limit you. I'd also drop HTT down to 3x. Mind 57C sounds a bit high. My opteron 165@2.6 is only at 47C under load, with AS5 on.

Trux clients are pretty good, if you are using 5.3.1 I'm guessing that's what these are.

Hope that helps.

Bok

Yesiree it helps A LOT!

Thanks :beer:

Any chance of an explanation for us mere mortals???
Somebody needs a good kick 😀

 

[Insidious]

LOL @ Andy! :laugh:

He's helping me understand the things I need to do to overclock an AMD A64 based PC.

The rest is about the optimized boinc client that lifts the benchmark numbers derived by the boinc client to get the best crediting possible for work done on Rosetta.

5.3.1 refers to a version number.

If you haven't tried it, and want too... just drop me a PM and I'll explain better

but for now... I have to eat some leftovers and wash them down with a :beer:

😀

-Sid

 

[TAandy]

Originally posted by: Insidious
LOL @ Andy! :laugh:

He's helping me understand the things I need to do to overclock an AMD A64 based PC.

The rest is about the optimized boinc client that lifts the benchmark numbers derived by the boinc client to get the best crediting possible for work done on Rosetta.

5.3.1 refers to a version number.

If you haven't tried it, and want too... just drop me a PM and I'll explain better

but for now... I have to eat some leftovers and wash them down with a :beer:

😀

-Sid

You need a good slap round whatever appendage is sticking out😀
BTW, good night 😀

 

[BlackMountainCow]

Has anybody seen the new 4,80 gfx yet? Darn, looks even better than before and we've got some stats info now as well.

Screenshot

 

[petrusbroder]

Looks really good! 🙂

 

[Insidious]

That does look good.

I like the extra information (completion progress and stats).

-Sid