Removing Seized 02 Sensor

[MikeyIs4Dcats]

Trying to remove a seized 02 sensor out of a manifold. I've tried PB Blaster, a 12" socket, and trying after letting the engine idle for 15 minutes to heat up.

Any other suggestions? I'm a little worried about using a breaker bar in fear of breaking the sensor

 

[MikeyIs4Dcats]

well finally got it after hitting the manifold with a propone torch for about 25 minutes. what a bitch!

 

[cardiac]

Glad you got it. I was going to suggest the torch. I had to do this quite a while ago and let the truck run to heat it up, then dumped ice on the sensor and it popped loose with a ratchet/socket. Might not be a good idea on cast iron manifolds, as I guess it could crack from the ice.....

 

[Fenixgoon]

i learned how O2 sensors work in my ceramics class. very cool

 

[Pacfanweb]

I saw the thread title and came in here to suggest a torch, but I see you got it. :beer:

 

[BW86]

Originally posted by: Pacfanweb
I saw the thread title and came in here to suggest a torch, but I see you got it. :beer:

same here :thumbsup:

 

[thedarkwolf]

Taking a hammer and busting off the pigtail and using a 6 point socket and an impact gun works pretty well too.