Ramapge dead now (same as V6000) ?

Hardware

Golden Member
Oct 9, 1999
1,580
0
0
We can go ahead and put any plans to compare NV20 to the Rampage to rest. I have been told by my close friend that works for 3dfx that the Rampage was just cancelled yesterday.
He said they had a company meeting (all hands) which was under a sort of secret "NDA" like thing.

Employees were told at this meeting the following:

1) There will be no Rampage produced due to lack of capital to finance this project with the poor sales of the Voodoo 5 products.

2) The high cost of development and research used to produce the V5-6000 was the back breaker. They spent in excess of $100 Million just on the Voodoo 5 alone, and sales haven't even begun to make up for this amount of expenditure.

3) The V5 was the last commercial video card to be produced by 3dfx. According to the president of the company who conducted the meeting, the company will now focus on 3d chips for arcade use and also the same plans as before, to develop products for other parts of the computer market instead of the video card area.

4) This is the same person who told me 6 months ago that the Voodoo 6 would never be produced. If you go back that far you can find my post when people were bragging about how the V5-6k would spank the Geforce 2. I stated in that post with confidence that the V5-6k would not be produced. My source is accurate and believeable.

5) Why would my friend talk when he could lose his job? Simple, he knows the company is doomed. He is currenty seeking employment elsewhere. (Nvidia to be exact..) In fact, he already interviewed there this past week.
 

hans007

Lifer
Feb 1, 2000
20,212
18
81
isnt' hardware like 19 years old, and quite possibly the most anti-3dfx type person on this board? How many 3dfx engineers do you think he knows? i wonder what daveb3d will say, wouldn't he be fearing for his job, and not caring enough to even post about 3dfx at this point. If they cant build rampage , they might as well go out of business, so i'd say they are probably gonna build rampage considering its already been in development since the v3 came out. If you dont have enough money for r&d then your company is doomed, and well the v5 is selling pretty well, and i'm certain they could get a loan or an infusion of venture capital.
 

Czar

Lifer
Oct 9, 1999
28,510
0
0
I dont think this is from Hardware, these rumors are going through the hardware sites like herpies in a whorehouse.
 

Hardware

Golden Member
Oct 9, 1999
1,580
0
0
At leat we KNOW 3dfx is out of money and they started to sell their stuff for non home users so I think it IS possible!
3dfx cant compete anymore with nvidia
rampage has no chance against the mighty nv20
 

sandorski

No Lifer
Oct 10, 1999
70,805
6,361
126
He isn't even thefirst to post this rumour! Hmm, you wouldn't happen to be A. Gore by any chance?
 

NFS4

No Lifer
Oct 9, 1999
72,636
47
91
Although I'm not a big fan of Hardware (or what he has to say), I'd like to see what DaveB3D has to say about this "rumor."
 

Hardware

Golden Member
Oct 9, 1999
1,580
0
0
the fact is 3dfx is out of money and cant compete with the monster nv20 so I think its more true then false!



<< 4) This is the same person who told me 6 months ago that the Voodoo 6 would never be produced. If you go back that far you can find my post when people were bragging about how the V5-6k would spank the Geforce 2. I stated in that post with confidence that the V5-6k would not be produced. My source is accurate and believeable. >>



I seems to be true then!

If its true a could laugh about Dave but thats is not my style.
 

NFS4

No Lifer
Oct 9, 1999
72,636
47
91


<<
If its true a could laugh about Dave
but thats is not my style.
>>


ROTF...Does anyone else smell cow dung? ;)
 

Deeko

Lifer
Jun 16, 2000
30,213
12
81
Hardware, so that was YOU that posted that on the 3dfx gamers board! Well, when I read it there and didn't know it was you, I thought there might have been a SMALL chance of it being true. But now, hearing it come out of your mouth, there is no chance.
 

Sohcan

Platinum Member
Oct 10, 1999
2,127
0
0
This rumor was already posted here last night: Crazy 3dfx rumor--good read. Why don't you include a link next time, Hardware, instead of pretending to have friends inside the video card industry. It's obvious you did not write this post; the English is too good, and there is not a single exclamation mark.
 

chuckieland

Diamond Member
Sep 30, 2000
3,148
0
0
hey hardware, how about install the driver first before you use them. a hardware can only be as good as it's software.
and frankly you don't got the software install
 

Hardware

Golden Member
Oct 9, 1999
1,580
0
0
Not a single comment from 3dfx!
Boys its over for 3dfx
Ready your cash for Nv&iacute;dia,ATi
 
Jun 18, 2000
11,212
778
126
*sigh*

The General Hardware's Great Neffing of 2000 update!

3dfx: its over! v5500 agp on hold - major problems
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=175894
Posted by: Hardware

WOHA Anandtech Forum gets kicked by 3dfx (All my flamers dont read this)
http://anandforums.gisystech.com/reply.cfm?catid=27&amp;threadid=174799&amp;messid=1083068
Posted by: Hardware

3dfx: first confirmed lockup messages are comming up -> with link for my fans !!!!
http://anandforums.gisystech.com/reply.cfm?catid=27&amp;threadid=174028&amp;messid=1075564
Posted by: Hardware

3dfx: its a complete recall everything is going back to 3dfx! ***CONFIRMED NOW BY 3DFX***
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173420
Posted by: Hardware

3dfx: its out now &quot;About 10% of the boards are locking up. &quot; from engineering dept for 3dfx!!!!!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173592
Posted by: Hardware

HAHA 3dfx gives you a free eMail!!! + free motivation tip for 3dfx!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173095
Posted by: Hardware

3dfx: First analyse about the V5 recall!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173134
Posted by: Hardware

Evidence: Banshee was never a 3dfx product!!!!!!!!!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173128
Posted by: Hardware

I bet bubba feels like an ass..
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173574

Fresh off the press--V5 5500 AGP DELAYED!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173046
Posted by: Hardware

Voodoo 5 release postponed by 2 weeks!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173279
Posted by: Hardware

voodoo5 delayed 7-14 days
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173099

V5500 Release Delays....
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173072

5500 delayed for two weeks!!!
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173042
Posted by: Hardware

Is the V5 out yet or what?
http://anandforums.gisystech.com/messageview.cfm?catid=27&amp;threadid=173033

Awesome news about the 3dfx V6000 (big problems! + link + near conformed!)
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=269282

LOL 3dfx again kicked its own butt ---- V6000 is history!!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=274671

ATi, Nvidia with new chips 3dfx with a new interview !
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=276328

3dfx all the way down new retail price for V5500 is $199/$189 !!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=276663

Official statement from 3dfx ceo why v6000 has been droped!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=278268

The reason why the V6000 could run at 65FPS !!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=279586

First results with V5500 and beta HSR drivers !!!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=280769

4X FSAA benchmark PIII600 : GTS VS 5500 VS GP-1!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=282287

3dfx V5 6000 is out from Quantum only $8.000 LOL !!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=284636

New interview with Brian Hook (ex 3dfx) !!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=285285

World has changed my 3dfx war is over !!!
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=275266

Ramapge dead now (same as V6000) ?
http://forums.anandtech.com/messageview.cfm?catid=27&amp;threadid=294010
 

Wah

Golden Member
Oct 16, 1999
1,799
1
71
Why do you think this is a good thing? My god, you act like you won some kind of contest. Open your eyes and look beyond that fact that you think &quot;nVidia RuLeZ!!!&quot; and think about what this could mean for competition and video card prices. I mean, they're already ridiculous, don't you think?
 

rahvin

Elite Member
Oct 10, 1999
8,475
1
0
Let me let you in on a little secret hardware. They aren't out of money till they are out of assests and they have QUITE a few assests. They are believed to being announcing that the Juarez factory will be sold next week and have secured financing for 50% of recievables. They should have close to a year of financing available to them even if they make almost nothing product wise.

I must say Hardware you are a complete and utter moron. I honestly believe you should be banned from anandtech because of your inability to do anything other than troll the board in an anti-3dfx manner. You are a disgrace to Germans in general and you really should seek counseling for this unnatural hatred of 3dfx.
 

rahvin

Elite Member
Oct 10, 1999
8,475
1
0
Wah,

He doesn't think nvidia is god or anything. He wants 3dfx to die. It's a really unnatural fascination, I can't believe the amount of time the guy must spend reading the 3dfxgamers board just looking for crap rumors to spread around. He needs to get a life, much like GUTB needed to. The behavior tendencies remind me exactly of GUTB's, he repeadly posts trolling material, and will jump into any thread that mentions 3dfx and post all kinds of inflamitory material.