Current setup:
Biostar 6100PM-M2
4gigs ram
raptor 36gig x 2 in raid 0
Okay so this setup is Ear piercing loud - has this real high pitch noise that the HDD's emit and it's driving me abs batshit crazy.
So I got a deal off FS/FT on a few hdd's.
Figured I take one of the hdd's and Acronis Clone the raid drive onto the 400gig hitachi deskstar HDS724040KLSA80 and here's when the FUN comes in... Unhook all the raid drives and fire up the Hitachi as a stand alone drive and SLOWWWWWW ....
I run HDtach and the hitachi drive is xfering at 5mb/s huh? I run HDtach on the Raptor raid and it's running 70mb/s on average speed. Okay so something is wrong with this drive..
So I did tons of different configurations with the Hitachi HDD:
1. New Sata cable - NOPE
2. Windows is set to DMA
3. Bios couldnt find a setting for DMA
4. Power cord is the white molex vs the sata power.
5. Currently running scandisk about 10% done so I'll update once I know this result. (but could this be the problem? if the HDD is bad = slow speeds?)
Another note - I have an exact drive and it was xfering at 40mb/s on HDtach. So what could cause this difference?
What are your guys thoughts? Any other tests or programs to run let me know
Thanks!
Here's a picture of the SMART Info
http://picasaweb.google.com/andrewchoe/Misc#5410448746135034866
Biostar 6100PM-M2
4gigs ram
raptor 36gig x 2 in raid 0
Okay so this setup is Ear piercing loud - has this real high pitch noise that the HDD's emit and it's driving me abs batshit crazy.
So I got a deal off FS/FT on a few hdd's.
Figured I take one of the hdd's and Acronis Clone the raid drive onto the 400gig hitachi deskstar HDS724040KLSA80 and here's when the FUN comes in... Unhook all the raid drives and fire up the Hitachi as a stand alone drive and SLOWWWWWW ....
I run HDtach and the hitachi drive is xfering at 5mb/s huh? I run HDtach on the Raptor raid and it's running 70mb/s on average speed. Okay so something is wrong with this drive..
So I did tons of different configurations with the Hitachi HDD:
1. New Sata cable - NOPE
2. Windows is set to DMA
3. Bios couldnt find a setting for DMA
4. Power cord is the white molex vs the sata power.
5. Currently running scandisk about 10% done so I'll update once I know this result. (but could this be the problem? if the HDD is bad = slow speeds?)
Another note - I have an exact drive and it was xfering at 40mb/s on HDtach. So what could cause this difference?
What are your guys thoughts? Any other tests or programs to run let me know
Thanks!
Here's a picture of the SMART Info
http://picasaweb.google.com/andrewchoe/Misc#5410448746135034866