---------- Quad Overclock Thread! ----------

[Acanthus]

Mine will be coming soon enough, still stuck at 3ghz until the damn corsair PSU gets here thursday.

So frustrating to be stuck at 37C loads and unable to OC anymore 🙁

 

[swtethan]

Originally posted by: Acanthus
Mine will be coming soon enough, still stuck at 3ghz until the damn corsair PSU gets here thursday.

So frustrating to be stuck at 37C loads and unable to OC anymore 🙁

I had a reserator, sold it though! I could have put a air conditioning duct over the top.... damn why didnt I think of that before!

 

[Acanthus]

Originally posted by: swtethan

Originally posted by: Acanthus
Mine will be coming soon enough, still stuck at 3ghz until the damn corsair PSU gets here thursday.

So frustrating to be stuck at 37C loads and unable to OC anymore 🙁

I had a reserator, sold it though! I could have put a air conditioning duct over the top.... damn why didnt I think of that before!

Its actually 2 pumps, 2 resorators, and a triple 120mm rad 😎

 

[swtethan]

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: Acanthus
Mine will be coming soon enough, still stuck at 3ghz until the damn corsair PSU gets here thursday.

So frustrating to be stuck at 37C loads and unable to OC anymore 🙁

I had a reserator, sold it though! I could have put a air conditioning duct over the top.... damn why didnt I think of that before!

Its actually 2 pumps, 2 resorators, and a triple 120mm rad 😎

why

 

[Acanthus]

Originally posted by: swtethan

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: Acanthus
Mine will be coming soon enough, still stuck at 3ghz until the damn corsair PSU gets here thursday.

So frustrating to be stuck at 37C loads and unable to OC anymore 🙁

I had a reserator, sold it though! I could have put a air conditioning duct over the top.... damn why didnt I think of that before!

Its actually 2 pumps, 2 resorators, and a triple 120mm rad 😎

why

Modular design, cooling everything externally, and seperately.

I had almost all of the stuff already so it was a matter of finding ways to use it all 😛

 

[DaPoets]

DaPoets

Q6600 B3 @ 3.2 ghz @ 1.3250v - TR Ultra 120 Extreme Push Pull
Intel D975XBX2 Bad Axe 2

 

[bigi]

BiGi
Q6600, 3.04GHz, 1.3V, Zalman 7000, B3
Gigabyte GA965DS-3 Bios F12, Version 2.0

- I could go higher than 3.04 but my Silverstone Lascala 13 case hasn't the greatest cooling.

 

[swtethan]

Updated, if you dont see yoruself on there, please re post all the information that is required, thank you.

and bigi had to out-do those 3.0ghz people with his 3.04 huh? lol

 

[eflat]

Q6600 @ 4.005Ghz (G0 stepping)
Tuniq Tower
A lot of voltage

And somewhat stable.

screenshot

 

[swtethan]

no

 

[Markfw]

Originally posted by: CitizenDoug
Q6600 @ 4.005Ghz (G0 stepping)
Tuniq Tower
A lot of voltage

And somewhat stable.

screenshot

stable means 4xprime95 (or orthos or other tool) for hours. All you did was boot.

 

[Acanthus]

Currently blend priming @ 3.3ghz for stability testing. Edit: 3 hours finished.

The 520HX came today, night and day difference, i was definately way underpowered.

This mobo gives me ENORMOUS vdroop, setting it at 1.5v gives me 1.408v idle, 1.376v load.

 

[Acanthus]

Acanthus
Q6600: 3.30GHz @1.42v (actual) (water) #B3
---Board: Gigabyte GA-P35-DS3R

 

[swtethan]

Okay I just downed my clock to 3.4ghz to see if I could control temps lower, Its stable at 1.328v windows idle, 1.312v load. I dont know if it will be stable at any less voltage. Idle is 35c, load is 60c. Pretty impressed that I have not passed the 1.35v max and i still have a 1GHz overclock

 

[aigomorla]

You guys are gonna love this.

L720B066 Q6600

1.46Vcore Idle, 1.44Vcore FULLY LOADED. FSB 415 x 9 3.73Ghz.

Board: ASUS P5K-DLX
Ram: Crucial Tracers
PSU: Antec Quattro 850

And for those of you guys that are going to say its not prime stable!

6.5h hour prime stable
http://i125.photobucket.com/al.../aigomorla/3.73ghz.jpg

 

[Acanthus]

Nice aigo, you keep encouraging me to go pick up a G0.

 

[swtethan]

Youa re one crazy man aigo

 

[aigomorla]

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

 

[swtethan]

Originally posted by: aigomorla

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

I could boot into windows at 4ghz and 1.45v, but I dont have the cooling to do it 🙁 maybe some day.

 

[Acanthus]

Originally posted by: swtethan

Originally posted by: aigomorla

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

I could boot into windows at 4ghz and 1.45v, but I dont have the cooling to do it 🙁 maybe some day.

Ill trade ya 😀

 

[swtethan]

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: aigomorla

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

I could boot into windows at 4ghz and 1.45v, but I dont have the cooling to do it 🙁 maybe some day.

Ill trade ya 😀

For money? 😛

I am right now stable 3.4GHz @ 1.32v idle 1.31v load on air. Getting it to 3.7+ requires 1.43 bios and something like 1.41 windows

 

[swtethan]

I turned on the power saving features on and now im still stable with .998v @2.2GHz idle 😀

 

[Acanthus]

Originally posted by: swtethan

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: aigomorla

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

I could boot into windows at 4ghz and 1.45v, but I dont have the cooling to do it 🙁 maybe some day.

Ill trade ya 😀

For money? 😛

I am right now stable 3.4GHz @ 1.32v idle 1.31v load on air. Getting it to 3.7+ requires 1.43 bios and something like 1.41 windows

You do better at default voltage than i do at 1.57v :brokenheart:

 

[swtethan]

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: aigomorla

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

I could boot into windows at 4ghz and 1.45v, but I dont have the cooling to do it 🙁 maybe some day.

Ill trade ya 😀

For money? 😛

I am right now stable 3.4GHz @ 1.32v idle 1.31v load on air. Getting it to 3.7+ requires 1.43 bios and something like 1.41 windows

You do better at default voltage than i do at 1.57v :brokenheart:

man that is crazy volts!

 

[Acanthus]

Originally posted by: swtethan

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: Acanthus

Originally posted by: swtethan

Originally posted by: aigomorla

Originally posted by: swtethan
Youa re one crazy man aigo

lol u should of seen the first run. She's stable here, but i dont like the start voltage at 1.51V :

http://i125.photobucket.com/al...orla/3.825GHZQ6600.jpg

I could boot into windows at 4ghz and 1.45v, but I dont have the cooling to do it 🙁 maybe some day.

Ill trade ya 😀

For money? 😛

I am right now stable 3.4GHz @ 1.32v idle 1.31v load on air. Getting it to 3.7+ requires 1.43 bios and something like 1.41 windows

You do better at default voltage than i do at 1.57v :brokenheart:

man that is crazy volts!

Its only 1.49 actual @ load, about 1.52 @ idle.