I just got this used Q9400 ( a few months old) and started oc-ing it ..
As on my sig setup i am giving it 1.3v vcore in order to reach 3.4ghz Prime95 Stable and still having trouble ( on Air). Do i still have room to raise it to about 1.32v?
I need to know if it is safe to run 24/7 at this voltage or not.
Temps are very cool from idle to playing the games i play... 35-50c ( on Prime it goes to 65c max)
I played with the nb voltage and cpu PLL but no luck so i set em back to Auto...
Everything else is on auto except: vcore 1.3, mem voltage 1.9, mem freq 1:1, Fsb Termination =1.2 pci freq= 100, mem timings 5:5:5:15, Load Line Calibration =Enabled,
cpu and pcie Spectrum=disabled
I donno what else to do with it.... should i just back it down to 3.2 where its a lot more stable at 1.25vcore.... ?
As on my sig setup i am giving it 1.3v vcore in order to reach 3.4ghz Prime95 Stable and still having trouble ( on Air). Do i still have room to raise it to about 1.32v?
I need to know if it is safe to run 24/7 at this voltage or not.
Temps are very cool from idle to playing the games i play... 35-50c ( on Prime it goes to 65c max)
I played with the nb voltage and cpu PLL but no luck so i set em back to Auto...
Everything else is on auto except: vcore 1.3, mem voltage 1.9, mem freq 1:1, Fsb Termination =1.2 pci freq= 100, mem timings 5:5:5:15, Load Line Calibration =Enabled,
cpu and pcie Spectrum=disabled
I donno what else to do with it.... should i just back it down to 3.2 where its a lot more stable at 1.25vcore.... ?
Facebook
Twitter