Problems with Samsung DDR 3200 and P4B533-E

[sufox]

Hi,

I have Asus P4B533-E with 1.6 P4 NW.
I got 2x256Mb Samsung (single side with -TCC4 chips) DDR.
When I put both memory in mbd I have stability problems at any
FSB. With one stick everything works perfectly.
With my old 2x 256Mb Samsung DDR 2700 everyhinh works OK.
I tried with new 1011e bios (also with 1009e) but nothing.
Are there any workaround or bios option to help me ?

Fox

 

[THUGSROOK]

<REPOST>
this question has been asked 10 times in the last 10 days ~ please do a search....

 

[sufox]

Originally posted by: THUGSROOK
<REPOST>
this question has been asked 10 times in the last 10 days ~ please do a search....

I searched and did not find any qustion or answer
Can you plase post a link for related articles


Fox

 

[Wolfsraider]

1. Set your DDR voltage to at least 2.7V or 2.8V if you mobo supports that. It will be fine at this temp. I am guessing you have 2 stick of 512mb ram now.

2. If you have 1gig of ram, are you sure you need that much... are you into video editing.

3. Let ram burn in for a week and then try uping the voltage. Burn in = 133fsb like you have and default Voltage for ram.

4. save your money.

here

but thats all i've found so far

let me know if you need more and i'll do a better search
hth
mike

 

[sufox]

I have 2x256Mb.
I tried with 2.7V and 2.9V and did not help.

 

[Wolfsraider]

searching...............

it seems a lot of people are having issues with two sticks of ram

so i am going to post two links for you to read

link 1

link 2

might be somebody found a way but this is a fairly common complaint

mike