Problems with clr cmos on Gigabyte GA-8IEXP MOBO

[AlucardHellsing]

I was trying to clear my bios on my motherboard and now when I boot up my computer it will do the memory test then it won't do anything after that. I can't even get into the cmos by pressing delete. There are 3 pins for the clr cmos. When the jumper is on the first 2 pins it clears the bios and if the jumper is on the 2nd and 3rd pins it is suppose to set the bios back to normal. I've used both setting and even replaced the battery but still my computer won't get past the memory test when I boot up.The board didn't have anything on the jumpers when I got it so I found an extra thing from a hard drive I have that I used on the jumpers on the motherboard. I'm not sure how I can get my computer to get past the memory test now at boot up.