problems with BH6+p2-350

[Toysrme]

Ok. I know that my p2 350 is locked, but how do I use the SEL100/66# signial to change the multiplier? It say you just change it from &quot;high&quot; to &quot;low&quot;(atleast from what i can tell) and that's all there is to it.(ofcourcee you have to change the multiplier also <g>)

But, every time i've tried this it still uses the 3.5x and boots at 350. Is there anything that I'm missing?(obviously there is...)

 

[Toysrme]

btw sorry for what appears to be a long running question.

 

[squirrel dog]

that wont unlock the multipier on your cpu.If you increase the bus speed,from 100 to 124,then you will overclock,to 434.Speed error control set to disable.

 

[Toysrme]

i know, that's what i'm running, but i was looking for 4*124, not 3.5*100.

runs stable at 464(3.5*133) but unfortunatly huge performance hit after disabling L2 cache, and most of my memory fails =(
(128 stick dose, 32 meg stick dosn't...)

anyways. i was under the impression after reading the review many many times that you could do that.

in that case, can someone tell me exactly what the SEL100/66# dose?

 

[Toysrme]

SEL100/66# unlocks hidden multipliers on Pentium2 350/400 only!! This switch, which toggles to High or Low enables multipliers of up to 5x on these CPU's.

ok. i found that on bsboards.com...

so why won't it work? can anyone help me?

or atleast tell me which version of the p2-350/400's that this enables?

 

[Compellor]

It only works on Pentium 2's that were made before August 19, 1998. Every one made after that date was locked, which means your chip won't work with the SEL100/66# switch.

 

[lsd]

I have an unlocked p2 350. When you switch the SEL100/66# to low, set the multipier to 4.0. If it reboots to 350 then you dont have an unlocked chip

 

[Toysrme]

ah i see thanks