problems posting.. pls read

[scim22]

aight, so I just got all this new stuff in yesterday(a7n8x dlx, barton 2500, buffalo pc3200 512mb windbond chips) .... anyways.... I hooked everything up, turned the power on, everything turns on, but no post.... so I turn it off, make sure the video card is seated right, check all the IDE connections, everything is good, go to power up again, still no luck, I can hear the HDD spinning up... so I dunno... also, no beep codes or anything ... so anyone have any ideas?

 

[JZilla]

Maybe you have tightened the mobo screws too much. Try to reseat the mobo.

 

[scim22]

I will back out on them, but what gets me, is nothing happens ... I hear everything power up .... but nothing else :/

 

[JZilla]

Try to reseat the video card. Take it out and put it back in.

Check to see if jumpers are configured correctly.

If all else fails I think you have to do it the hard way. Try to boot with only the video card, ram, cpu (with hs and fan).

Another option could be to try another video card and/or ram.

 

[scim22]

well, I plugged in a headset, and it said failed vga test .... so I took the card out, and reseated it... and still nothing ... so I dont know