- Dec 11, 2006
- 204
- 0
- 71
Hello Guys,
Here is the system SPecs..
CPU: Intel E6600
MB: Asus P5n32-E-SLI
RAM: Transcend PC5300 DDR2 667Mhz Ram
VGA: XFX 8600 GT
Monitor: Viewsonic 20" VG2030WM
PSU: CoolerMaster 600watts SLI ready. total 58 amps on 3 12volts rail.
Case: CM Stacker.830
and here is the problem..
i have set up everything even with proper cable mangement. and even rechecked the component installation twice before powering the PC up.
upon powering the PC i can see VGA card fan running smoothly and CPU running smoothly too, but no POST at all on the monitor. I have plugged the DVI port of monitor to first on the VGA card and even switched the Port to see if i am wrong on that.
Even after all this there was no Post to BIOS.
Debugging: - 1) Removed VGA card and installed 7950GT from my system to cross check for Video cards fault. -- No Luck still failed to boot into BIOS.
2) Removed 2 sticks of RAM and installed the ones in my system. -- still no luck, No POST to BIOS.
3) Installed both RAM and VGA Card to my system. worked very well without any hiccup..
So what you guys think.. is it the problem of MotherBoard???
I dont even have an inbuilt MObo speaker to hear Post Beeps
any suggestions are of great help to me ...
thanks in advance..
Here is the system SPecs..
CPU: Intel E6600
MB: Asus P5n32-E-SLI
RAM: Transcend PC5300 DDR2 667Mhz Ram
VGA: XFX 8600 GT
Monitor: Viewsonic 20" VG2030WM
PSU: CoolerMaster 600watts SLI ready. total 58 amps on 3 12volts rail.
Case: CM Stacker.830
and here is the problem..
i have set up everything even with proper cable mangement. and even rechecked the component installation twice before powering the PC up.
upon powering the PC i can see VGA card fan running smoothly and CPU running smoothly too, but no POST at all on the monitor. I have plugged the DVI port of monitor to first on the VGA card and even switched the Port to see if i am wrong on that.
Even after all this there was no Post to BIOS.
Debugging: - 1) Removed VGA card and installed 7950GT from my system to cross check for Video cards fault. -- No Luck still failed to boot into BIOS.
2) Removed 2 sticks of RAM and installed the ones in my system. -- still no luck, No POST to BIOS.
3) Installed both RAM and VGA Card to my system. worked very well without any hiccup..
So what you guys think.. is it the problem of MotherBoard???
I dont even have an inbuilt MObo speaker to hear Post Beeps
any suggestions are of great help to me ...
thanks in advance..