Problem with barton 2500

[vitoru]

I need help, my configuration is: BARTON 2500+, 512Mb PC3200 ADATA, GIGABYTE 3D Cooler, ATI RADEON 9200. I raise FSB on 200 * 11 - 2204 Mhz, SDRAM: 8 3 3 2.5T, VCore:1.75 When I play Far Cry or Princ of Persia it crash, on prime95 cras too.

AMD Athlon(tm) XP 3200+
CPU speed: 2205.26 MHz
CPU features: RDTSC, CMOV, PREFETCH, MMX, SSE
L1 cache size: 64 KB
L2 cache size: 512 KB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
L1 TLBS: 32
L2 TLBS: 256
Prime95 version 23.8, RdtscTiming=1
Best time for 384K FFT length: 27.941 ms.
Best time for 448K FFT length: 32.347 ms.
Best time for 512K FFT length: 34.768 ms.
Best time for 640K FFT length: 46.506 ms.
Best time for 768K FFT length: 55.852 ms.
Best time for 896K FFT length: 68.109 ms.
Best time for 1024K FFT length: 75.577 ms.
Best time for 1280K FFT length: 99.939 ms.
Best time for 1536K FFT length: 119.107 ms.
Best time for 1792K FFT length: 145.573 ms.
Best time for 2048K FFT length: 160.392 ms.
[Sat Nov 27 13:11:11 2004]
FATAL ERROR: Resulting sum was -2.611623099656748e+235, expected: 3030483578183005
Hardware failure detected, consult stress.txt file.
What can I do to fix this problem?

 

[TheCanuck]

You probably either need better cooling or need to up your vcore (try 1.8 or 1.85v). What sort of temperatures are you getting?

 

[vitoru]

Normal temp. is around 40 but when I start prime95 it goes up to 50. If I increase Vcore the temp. will go above 50 ?

 

[beserker15]

yup, going from like 1.75 to 1.8 or 1.85 will probably give you a 3-5C increase in temps.

 

[vitoru]

ok I raise to 1.8 but it still chras, now temp. goes to 58 is that not to much? Why it chras, is cpu or sdram cause problem?

 

[Hankysmoo]

Most likely your cpu just isn't good enough. I have a barton 2500+ and it doesn't even run well at 2.2ghz.