• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Problem with AB9 Pro BIOS update

H

Hidden Hippo

Member
I've just updated the BIOS on my AB9 Pro, following the instructions given to me by an Abit representatice and also the instructions that I was linked to in the read me. However, I now have a 00 post code when there is power to the motherboard, rather than the 99 code I used to have. Also, it will not boot at all when the CMOS jumper is in, but when there is not jumper over the pins, it will boot and give a C1 error (which I expected). Can someone help me by providing a solution to this problem? Thanks in advance.

Edit: Found out that the 99 code is only if you have just shut down and not permenent. The other problem with the CMOS still persists.
 
The CMOS jumper has 3 pins. Check that the jumper is connecting the same 2 pins that were connected as original.
The Abit Windows flash utility has always worked fine with my Abit IC7 board. So, try re-flashing using the Windows mode
flash utility.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top