• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Problem when reseting

Zensal

Zensal

Senior member
I just put together an old system I had around and I'm having some problems. Every time I reset the computer, it never comes back. Fans stay on, but no beeps or video. If I reset the CMOS with the jumper, or if I remove the battery, it comes back, but if I restart again, no POST. Tried changing the battery, video card and going down to single RAM sticks with both sticks. Specs below and thanks in advance.

MSI K8N Neo Platinum Skt 754
A64 3000+
1 gig DDR400 Value
MX400
 
If there happens to be a flash drive plugged in, or a card reader with a memory card in it, try removing the drive/card. I had one system that did that 😕
 
No. I stripped it down to mobo, cpu, primary hdd, video, and RAM, with keyboard and mouse plugged in.
 
You could further strip it down by disconnecting the primary HDD. The system should still POST without it.

If you still have a problem then in my opinion based on your other diagnosing you either have a problem with the BIOS or a bad MB.

If you're confident you have all the BIOS settings set correctly then you might try flashing the BIOS if an update is available.

At that point if it still doesn't work then it could possibly still be a bad PSU or CPU, but I think that it is most likely a bad MB.
 
After about 4 hours of hassle, I finally re-flashed the BIOS with the same/final version and it is fixed. I guess it must have been slightly corrupted or something.

Thanks for the help and ideas.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top