• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Power brick question

rivan

rivan

Diamond Member
I've got a bunch of external drives I'm trying to use, and don't have correct power supplies for all the drives.

However, I have other power supplies that use the same plug type (similar to a PS/2 connection, except that there are 5 pins, not 6).

The output voltages are the same on both bricks +5v and +12v but the amperages are higher on the spares I have - 1.5A on both, and the bricks I'm short on say 1.0A +5V and .75A +12V.

If I use the higher-amperage power supplies on the drives, will I fry them?
 
Higher amperage won't fry anything. I would be more worried that the pins are not in the correct order and sending 12 volts in to the 5v / ground and otherwise letting the magic smoke out.
 
I'll verify the voltage layout.

I've also found a couple rated for LOWER amperage than the correct bricks. I assume they'd be ok, though I may burn out the underrated supply?

Here's a pic of the project, for the laughs. These are all DVD-RAM drives, circa 2001/2. I've got a couple hundred double-sided disks I need to pull the data from, and they're VERY slow.

IMG_20120724_143719.jpg
 
rivan said:
I'll verify the voltage layout.

I've also found a couple rated for LOWER amperage than the correct bricks. I assume they'd be ok, though I may burn out the underrated supply?

Here's a pic of the project, for the laughs. These are all DVD-RAM drives, circa 2001/2. I've got a couple hundred double-sided disks I need to pull the data from, and they're VERY slow.

IMG_20120724_143719.jpg
Click to expand...

Wow, I feel sorry for you. 🙁 That looks like an incredible amount of fun.

As for using a lower rated supply: best case, it won't work at all; worst case, it works but the power supply runs hot and/or explodes. Or maybe I got those the wrong way around?
 
Is that like... one of those projects where you have 2000 disks so hit up ebay for "bulk pack of 10 DVD-RAM drives" for $1 to move it all to different storage?
 
Yep, except we had all those drives in a storage closet. There are another half dozen to the left of the shot. The real suckfest? They're all like 1x and 2x drives or something - each side of those takes ~40 minutes to copy.

Pop in 5 disks, hope none are corrupt because it crashes the finder, start copying, walk away.
 
rivan said:
Yep, except we had all those drives in a storage closet. There are another half dozen to the left of the shot. The real suckfest? They're all like 1x and 2x drives or something - each side of those takes ~40 minutes to copy.

Pop in 5 disks, hope none are corrupt because it crashes the finder, start copying, walk away.
Click to expand...

I wonder if you would have better luck using the BSD terminal to prevent crashes. Terminal based copy should have extra options like continue on fail etc.
 
imagoon said:
I wonder if you would have better luck using the BSD terminal to prevent crashes. Terminal based copy should have extra options like continue on fail etc.
Click to expand...

I agree that some sort of command-line copying tool will work better than trying to use a relatively heavy GUI tool like Finder. Good ol' cp will indeed continue on to the next file if it encounters any I/O errors.
 
I'll start using terminal for the copies, though some of the pathnames are PITA.

I'm stuck with just 5 drives to copy ~1200 double-sided disks - is there somewhere I can order a few more power supplies from at non-astronomical prices?
 
DA-30C01

Is it really as simple as getting them from Amazon? I'd have thought, as old as the power supply is, the part number wouldn't mean anything to the internet.


IMG_20120726_162151.jpg
 
So, I'm well into this file transfer project. 20 or so TB of files going to another company. I recently ran out of FireWire drives; asked IT for more, here's what I got.

IMG_20120905_143529.jpg


We're almost all Mac here; the newest machines are about 18 months old. As far as I'm aware, there's no USB3 in the house.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top