Post your overclocked hardware speeds and temps

[biofobia]

Please post your 3dmark scores for your overclock hardware.... include motherboard, processor, processor overclock speed, video card, video card overclock speed, and case temps/ idle cpu temps/ and 100% load cpu temps

My overclocked speeds
Abit KR7A-133R
Amd Athlon 1900+ 1.6ghz at (146x12) 1.76ghz (37 idle/45 full load)
Visiontek Xtasy 6964 Geforce 3 Ti 500 240/500 at 265/565
case temps: 24-27 celcius

 

[John]

Ok, I'll bite.

My overclocked speeds
Asus P4B266-C
P4 1.6a @ 2.4GHz(150FSB @ 3:4) (40c idle/50c full load)
LeadTek Ti4400 @ 305/690 stable
3dmark2001SE: 11632

 

[XBoxLPU]

System in my sig

OC hardware :

Gainward PowerPack GF3 225/510
Northwood 1.6A at 2367MHz ( 148 FSB, Memory ratio 4:5, vcore 1.6500 )
CPU temp under full load is around 48 C, Case temps are around 30 C
8230SE

 

[JellyBaby]

<< P4 1.6a @ 2.4GHz(150FSB @ 3:4) >>

Yours is pretty big, John. Say I thought the P4B266 could only apply the 3:4 ratio at 132 MHz and under yet you seem to have your memory running at 200 MHz while at a 150 MHz FSB....?

 

[John]

I have read mixed reports on the 3:4 setting (auto), so I cannot give a firm answer. The auto setting @ 150FSB yields higher memory bandwidth according to SANDRA.

 

[biofobia]

What I heard on one forum, to find the actualy clock cycles for a processor amd and p4, you take its cpu speed.. for example a p4 1.6a northwood overclocked to 2.4 and multiply it by 6 and you get 14,400 clock cycles.... and then you take a amd athlon xp processor speed for example my processor 1,6ghz oc to1.7 and multiply it by 9... 1,700x9=15,300 ... so the 1.7ghz amd processor is faster than the 2.4 p4 processor because the clock cycles for the amd are more than the p4 15,300>14,400 ... thats why they say Mhz dont matter

but that is only speed... all the other things count to like cache,etc ,etc.. so they are about even in the end

 

[jcmkk]

The reason I chose a P4 over an Athlon for overclocking was because I could overclock my P4 and still have it running quiet. With an Athlon, I would need a screeming delta to really do any overclocking. Don't get me wrong, I'm a big AMD fan. I really just wanted to try something new.

Gigagyte 8SRX
P4 1.8A @ 2GHz <-- I have got it up to 2.2GHz at default voltage, but I don't have any of my case fans in yet so the temps were a little high for my taste.
Idle 39c Load 45c
GeForce 4 Ti4400 @ 300/600 <-- I haven't tried any higher yet. It is so fast now that I don't even need to overclock it anymore. When I get bored
with it I will probably go for more.

 

[bjc112]

1.2@1400..
Epox 8k7a 512 DDR... 133 FSB..

Geforce 3 235/535

3dmark.. 7000

 

[biofobia]

<< The reason I chose a P4 over an Athlon for overclocking was because I could overclock my P4 and still have it running quiet. With an Athlon, I would need a screeming delta to really do any overclocking. Don't get me wrong, I'm a big AMD fan. I really just wanted to try something new.
>>



Or just get watercooling, I would to try that some day.... another question...do you know why my idle temps dont go below like 48.... everyones are in the lower 40's... and i hae the alpha 8045, 2nd best heatsink next to swifty 462.... why are they so high.. also have a Panaflo H1A 39cfm and 32db... i uninstalled the heatsink because i thought i put too few AS3 on and cleared that AS3 and added a little more than before.. still the same temps... like 50idle and 58 full load with prime...... wtf... i also have very good case cooling.. my overclocks arent that high.. only 141fsb at 1.85 volts... hmmm... i didnt pay for a 35$ heatsink for the temps to be like a stock heatsink.. anyone know what the problem is?

 

[smp]

Tbird
Abit KG7

1.4 @ 1.9
190 FSB x 10
Alpha 9045 w/ twin stacked delta's
23 case fans


edit: forgot to add ..
AHMJA stepping .. (made in sri lanka)
DDR @ cas 1.5 w/ the cMOD (crucial)
Vcore @ 2.2 w/ voltage MOD

 

[RaynorWolfcastle]

My overclocked speeds
ECS K7S5A
AthlonXP 1600+ [1400 MHz stock] @ 1575 MHz [150 FSB x 10.5] (38C idle - 44C load)
Radeon 7500 @ stock speed
case temps: 21C-23C
3dMark2001 SE: 5060 while running Prime95 concurrently

 

[ObiDon]

At this moment...

Epox 8KTA3+Pro
Athlon XP 1500+ (1333MHz) at 1669MHz @ 2.0V (41C idle/ 50C full load)
MSI GF2 GTS never been OC'ed :Q
case temps 24C-26C

NO screaming Deltas

 

[JoyDivision]

Abit KT7A-Raid
Amd Athlon 1.13ghz at 1.4ghz (45 idle/51 full load)

 

[RaynorWolfcastle]

<< 1.4 @ 1.9
Vcore @ 2.2 w/ voltage MOD >>





<< Athlon XP 1500+ (1333MHz) at 1669MHz @ 2.0V (41C idle/ 50C full load) >>



:Q wow, those are pretty high Vcores you guys are using!!!!

I'm at stock voltage (1.75V), using an Alpha PAL8045 + Panaflo L1a. Case fans (3) are all L1a's also, so my Athlon is actually quieter than my PIII-450 (Katmai)

-Ice

 

[Challenger]

P4 1.6A@2320 1.7v
Radeon 8500 stock speed
Asus P4B266
512meg Crucial PC2100@145mhz
3DMark 2001 9000 + some change
CPU idle temp 30c
CPU load temp 42c
Case temp 25c




<< Or just get watercooling, I would to try that some day >>



Water cooling is a hastle if you switch out components with any regularity

 

[Athlon4all]

My mobo can't oc at all so I'm left with my vid card:

GF2MX400 @ 215/185 core/mem

 

[DeathByDuke]

Got a Ti200 from Sparkle (Live in UK) at default 175 core and 400 Memory plus mem is 3.8ns! running perfectly with no extra cooling at 250 core and 550 mem - not bad for half the price of Ti500!! AND fps are 190fps on a Duron 700!! (in Q3) and getting 6500 on 3DMark2001 SE (might be 8000-9000 on a 2000+ P4 2.2GHz)

Sweet bliss this card1

 

[Red Dawn]

Hmmm. Running a p4 1.6a@133FSB @default Voltage with an Akura (SP) Sunflower HSF on a MSI 845 Ultra ARU. Prior to flashing my BIOS MY CPU Temp was16C IDLE.. Of course that was wrong. When I flashed it it rose to around 37-42 C Idle. I had some original Artic Silver so I used that but I don't think it's cutting it. I'm going to get AS3 for it. I also have a couple of 10,000RPM SCSI Drives warming that case up so I'm not really disapointed in my temps. It's cooler than my Tbird and I was able to get rind of 3 case fans which was a huge improvement as far as loudness went.

On second thought I'll save the rant for another time

 

[Dan]

T-Bird 1.4GHz at 1.68GHz (146*11.5) on an MSI K7T266-A PRO2 with 2*256MB Crucial PC-2100 DDR.
Gainward GeForce2 Pro/450 at 220/450
Right now CPU temp: 46C, case temp 35C.

 

[DeathByDuke]

Hey Guys,
jus wondering wot's the highest o/c speeds or percentage o/c you lot got on videocards WITHOUT any visual artifacts?
mine works around at about 30% for core and 27.3% for memory and thats without extra cooling (thinking of gettin a better fan/heatsink combo)

 

[Red Dawn]

<< jus wondering wot's the highest o/c speeds or percentage o/c you lot got on videocards WITHOUT any visual artifacts? >>

I didn't even bother to OC it past 140FSB. At that speed it ran 3DMark2001 loops without any visual artifacts. I 'm sure I could get more out if it if I upped the voltage. I'm not bitterly disappointed in the performance I just expected more.

 

[MasterHoss]

Not about to run any benchies right now...

SOYO SY-K7V Dragon Plus! (FSB 148MHz)
Athlon "C" 1.2GHz @ 1.406GHz (9.5 multiplier)
Gainward PowerPak!!! GeForce3 (235MHz/545MHz)
temps: 30/43 under "regular use" IE open, Hauppauge WinTV running, Outlook XP, throughput measurement

 

[bjc112]

guys do you think if i up my voltage higher than 1.91 i could go higher than 1.4.. my fsb is kinda limiting.. one of my cards doesnt like it:|

 

[biofobia]

why do you want to go higher than 1.4 .... you have 200 mhz increase... thats really good...

 

[bjc112]

WHY?

Ha! the need for speed

always room for more.. well possibly... plus my temps are nice, so i figure i can get more ..