Post your CPU, Cooling and Temp ?

[Cesar]

My CPU cooling is Volcano 7+, will mod to install a Vantec Tornado 80mm 84.1 cfm on it

CPU = Intel Celeron Tualatin 1000Mhz @ 1333Mhz

Well !!......

 

[ChampionAtTufshop]

hmm...well not mine, but i had a hand in them:

p4 1.6a @ 2.6ghz w/ volcano7+ @lowest fan setting for most part, sometimes at med

athlon xp 1800+ 1.53ghz@1.8ghz /w swiftech mcx462+68cfm delta

planning on getting a rig for myself soon...xp2400+ w/ slk800+82cfm sunon (rebadged tornado or soemthing along those lines)

 

[Blooz1]

Athlon XP1600 @1750Mhz with Coolermaster HHC-001. 80MM Titan aluminum frame fan (37cfm/27db) on 80-60 adapter.

 

[oldfart]

My CPU cooling is Volcano 7+, will mod to install a Vantec Tornado 80mm 84.1 cfm on it
CPU = Intel Celeron Tualatin 1000Mhz @ 1333Mhz

Wow. That is a really noisy setup (84 CFM). WAY overkill for a Tually @ 1.33 GHz. Those chips dont need anything like that. Replace that fan with a Panaflow L1A to quiet things down.

I run a P4 1.6A @ 2.4 GHz with the stock HS/Fan and ASII

 

[ScrewFace]

1.4GHz Tualatin Celeron overclocked to 1.757GHz using a TT Volcano 7+ at full speed. It does run hot, though, at around 53 degrees Celsius but that's because of that darn heat spreader. Get rid of the heat spreader, Intel!:|

 

[Wingznut]

P4-2.8 @ 2.8ghz w/a Sunflower AVC.

 

[LED]

Thermaltake AX7 and Antec tri-color LED fan with AMD2400XP @ 2.5GHz+

 

[Pragma]

P4 2.53 C1 @ 3.14 GHz., Radeon 9700 Pro revision 3

Temps:

MAX LOAD: 33C CASE MAX LOAD: 31C
CPU IDLE: 28C CASE IDLE: 27C
GPU CORE MAX: 36C GPU CORE IDLE: 29C

Cooling:

CPU: Switfech MCX4000 w/ Vantec Tornado (running through a nexus at ~ 50% speed, because from 50% to 100% speed I only dorp 1C degree)
CASE: *6* 30CFM Case Fans
GPU: Modified custom 1U Rackmount server (Dynatron) with a 60mm sunon screamer on it (7700 RPM)

With all on max power, well, "a thermo-nuclear weapon went off you say? Outstide my front door? I didn't hear anything..."

 

[Cesar]

<FONT face=Verdana size=1>ScrewFace try to take off the HeatSpeat whatever they call it to cool down your Celeron you could get 1866Mhz
(133X14)</FONT>

 

[Jeff7181]

XP1700 T-Bred @ 1666 w/ SK-7 heatsink and 70mm 4500 RPM fan (not sure on cfm but it's a cheap one so probably around 30)

idle = about 41 C
max observed = 50 C

 

[HaVoC]

Hmm...I think my 8RDA+ mobo under-reports temps. Have XP 1700+ T-bred B, SVC GC-68 heatsink, Artic Alumina. Running actual speed of 1800 Mhz (12 x 150) and under load (Prime95), temp is at 41 C. I'm a little wary of the current heat levels since I really don't know what the core temp actually is (Why won't any nforce2 mobos read the XP diode?). I'll back down one notch on the multiplier when I reboot.

 

[Metalloid]

Athlon XP Palomino 1900 1.6ghz@1.7875 with Thermalright AX-7 and Delta 80mm 80cfm. 2x120mm Delta 130cfm case fans.

Case temps:
Idle 22c
Load 24c

CPU temps:
Idle 33c
Load 38c

 

[Sappster]

AthlonXP 1700+ Alpha PAL 8045 HSF with 80mm fan running at 1802! fsb = 163 and vcore at 1.75 in BIOS. Asus A7N8x Deluxe mobo.

 

[Metalloid]

Originally posted by: BuffBoyBradley
AthlonXP 1700+ Alpha PAL 8045 HSF with 80mm fan running at 1802! fsb = 163 and vcore at 1.75 in BIOS. Asus A7N8x Deluxe mobo.

Is that a T-Bred B? Because that is one heck of an overclock!! Also, what 80mm fan are you using?

 

[Cesar]

I am really thinking on buying a new mobo and CPU maybe Athlon Xp's a good overclocking T-bred to use it on my Volcano 7+ if it doesn't cool enough I will mod to work with my Vantec Tornado 80mm 84.1 CFM with it I will have the best Heatsink ever even better then this expensive Alpha units and Thermalright SLK-800 heatsink:Q

 

[PraetorianGuards]

XP 2000+ running on a Zalman CNPS-6000Cu cooler. Running at 54C at lowest rpm setting. Yeah, it's high hehe

 

[mrman3k]

Running an XP1700+ OC to 1.6GHz using stock cooler getting 48C. Not bad IMO, once I get my Swiftech, hopefully I can crank this thing up!

 

[Sappster]

Originally posted by: Metalloid15

Originally posted by: BuffBoyBradley
AthlonXP 1700+ Alpha PAL 8045 HSF with 80mm fan running at 1802! fsb = 163 and vcore at 1.75 in BIOS. Asus A7N8x Deluxe mobo.

Is that a T-Bred B? Because that is one heck of an overclock!! Also, what 80mm fan are you using?

I don't believe this is a T-Bred B. Unfortunetly I didn't look at the Chip to see which it was before I put the HSF on. And I'm not about to take it all apart on look. As far as the Fan?? The 80mm fan that I am using came with the Alpha PAL 8045. You can get the HSF without or as a combo. I took the advantage of the combo. Look at Newegg.com to see which kind it was if you wish.

 

[Drsignguy]

This is what I have...................The 2.53 runs at 98f idle and never gets over 116f under load. As for my 2.2 system, that runs at 87f idle and never gets over 100f under load. The diferance is the fan, a bit loud, and that is why the 2.53 has a tad bit lower cfm fan.


Docs Operations


Pics

 

[movinslow]

Athlon XP 1700 (Palomino) @ 1.51GHz (slight o/c, FSB 137.3) Volcano 7 (not +)
38C idle 42C load
3 case fans, 2 in (one bottom, one at drive bays), 1 out.

 

[loafbred]

I don't trust the accuracy of ANY motherboard monitoring, but here's what mine says:

Thermalright AX-7 w/Sunon 50 cfm, Arctic Alumina paste, Palomino 2100+ AGOIA-W @ 190*10 w/1.85v. Idle - 38*C, gaming - 42*C.

 

[CraigRT]

P4 1.8 @ 2.7 (haven't gone higher) @ 46C on an EPoX 4PEA+

with this

 

[techfuzz]

Athlon XP 2400+ (200x11 = 2.2GHz), SLK-800, YS-Tech 39cfm, 50C
or
Athlon XP 2400+ (166x12.5 = 2.075 GHz) at no more than 42C

Still testing to see which gives me better performance with the hacked vs. non-hacked BIOS.

techfuzz

 

[hdeck]

xp1600+ @ 1680, coolermaster hsf w/ arctic silver paste, low-mid 40s

 

[mjolnir2k]

MP 2100 @ 1826 / 37c