**POLL**which CPU setting would you prefer?

[Corporate Thug]

 

[Corsairpro]

1700+@2300 Mhz @ 1.8V

Most people say "You'll shorten the life of the CPU at that voltage"

I say, you'll be using an Athlon 64 / Pentium 4 this time next year and whomever you sell it to will most likely be running it at default voltage. So overclock that baby!

 

[KillaBong]

Exactly, 1.8 doesn't matter when they cost less than $50 for a new one.

 

[Corporate Thug]

Originally posted by: KillaBong
Exactly, 1.8 doesn't matter when they cost less than $50 for a new one.

normally i would agree but i'm sooooooooo broke right now that if it were to burn out, i wouldnt be able to get another one for a while

 

[pspada]

I've voted. So, when are you going to send me the processor?

 

[Corporate Thug]

Originally posted by: pspada
I've voted. So, when are you going to send me the processor?

it's on the way

 

[DAPUNISHER]

IMO the extra 100mhz just isn't worth the extra heat and voltage required for it, that's why I run my 2500+@2.3ghz 1.632v instead of 2.4ghz 1.775v

 

[Jeff7181]

Originally posted by: KillaBong
Exactly, 1.8 doesn't matter when they cost less than $50 for a new one.

Since it's only $50, will you buy me one?

 

[GooGooCluster]

I choose the 2200mhz but its only because you did not have the choice of mash potatoes and gravy.

 

[soja]

It's would be nice to know you could do 2.3 @ 1.8 but I'd rather run it at low vcore, besides it's only 100mhz...

 

[BmXStuD]

1st what is a extra 100mhz going to do for you haha and 1.8 is too high i run mine @ 1.6

 

[Dustswirl]

Burn it a lil!!! A64 is around the corner it'll live till then ;P

 

[bgeh]

i'll take 1700+@2200MHz 1.65v

 

[NYHoustonman]

The first one...There is ABSOLUTELY no point to run it much faster than that today, save for the fact that you could "show it off" to people.

 

[Shimmishim]

go with the 1.8 volts

i'm using about 1.8 volts +.01-.02 (fluctuates) to get 2.5 ghz and amazingly i haven't had a hiccup yet...

and yeah.. if i kill it... i got 3 other tbreds sitting in my room

 

[bgeh]

Originally posted by: Shimmishim
go with the 1.8 volts

i'm using about 1.8 volts +.01-.02 (fluctuates) to get 2.5 ghz and amazingly i haven't had a hiccup yet...

and yeah.. if i kill it... i got 3 other tbreds sitting in my room

is that the chipped 0310XPMW at 2.5GHz@1.8v?
if then, wow!!!:Q

 

[McCarthy]

Since it's the summer, it's hot outside and even with AC gets too warm in my computer room....

Lower voltage and speed for lower max output. So I voted A. Took off my own overclock completely for now, might even underclock and see what min voltage I can get to.

 

[xDeLiRiOuSx]

Heck I run my Pentium 4 2.53Ghz at 3.04ghz at 1.28voltage and it's 10C cooler than at the same clock at 1.525 volts

 

[BG4533]

Run it at 1.65V. Less to worry about mainly. 1.65V will also run a lot cooler than 1.8v, so you should be able to turn your fans down a bit and not go deaf. I have settled on 2GHz @1.65v for my 1700 because it takes 1.75 to get to 2.1GHz.