I have a Duron 750Mhz.. running on an Epox KHA3+ mobo wif a 256mb Apacer PC2100 stick. Oh, and the PSU is a 300W can't remember the make.
Before this, I was running it on a SDR platform on a MSI KT133A mobo, and it ran fine. After I changed to the current specs, the PC won't boot normally.
At times, the booting stops when the debug card on the mobo shows "25" and sometimes "2b" or "2d", and i will need to press the reset button a few times and wait until it suddenly works normally, and proceeds to load windows. It's so very erratic.. getting on my nerves!!
Does anyone has any idea on what's wrong with this machine?
Before this, I was running it on a SDR platform on a MSI KT133A mobo, and it ran fine. After I changed to the current specs, the PC won't boot normally.
At times, the booting stops when the debug card on the mobo shows "25" and sometimes "2b" or "2d", and i will need to press the reset button a few times and wait until it suddenly works normally, and proceeds to load windows. It's so very erratic.. getting on my nerves!!
Does anyone has any idea on what's wrong with this machine?
Facebook
Twitter