Please HELP!

[Thijssss]

I got a ASUS P2B v1.04, Slot 1 to Socket-370 converter board (ASUS S370-133 / S370DL rev 1.02)

So I removed my old Celeron 300a, set the board to 100Mhz FSB with 8.0x ; I installed the Celeron 800 (SL5EB cD0 stepping) and set the 'slocket' for 'Celeron' 'Intel' (could set to Intel or Joshua (???)) and the voltage on the slocket to 1.75v (I know my MB only supports from 1.8 as everybody told me.. but I still wanted to try it).
When I put power on my machine nothing happend.. so I quickly turned it off and set the slocket voltage to 1.8v and .. yes! it powered up! all the little lights in the PC began to work.. hdd spinned up .. bios seemed to do ok .. only now here is my problem, my screen stayed dead!!

What did I do wrong?
It's a real ASUS mainbord, the slocket is from ASUS and says that it has "S370-133 Support 133Mhz FSB & Coppermine CPU" (also 100FSB listed in the features highlight).
And I got a real In-the-Box Intel Celeron with the nice stepping everybody around here loves so much!

Somebody PLEASE help me! (

TiA

 

[Thijssss]

Add:

I have already started to search all over the Internet to find help and I found this on the ASUS website somewhere in some forum:

My current set up:
P2B rev 1.02 w/ 1012 bios
Asus S370-133 Slocket
Pentium III 800e FCPGA running on 1.8 voltage

I recently upgraded from a PII 400mhz, and the system runs fine. However, I experience nearly no improvement in bootup speed, or application load time. The only difference I could tell was that I'm now able to crank up the graphics in all my games.

;
Not that I care about his problem but he got a older rev of his P2B.. I got 1.04 and the 1012 bios.. so I guess it should be able to work 'somehow' ? Please help!

TiA

 

[Thijssss]

It works! .. don't ask me how tho

it's a long story and all of a sudden it works.. maybe some contact didn't made contact?.. no idea
It's the same setting as my Celeron 300a .. 100FSB / 4.5 .. it runs on 800 itself just like the AT-FAQ Man said.. really great ^_^.