Please help!

[SamzAthlon]

You guys can check my specs below.

After an hour and a half prime95 fails. The system is stable in the sense that windows or applications never crash. Should I be concerned?

Cpu voltage is 1.55v
mem voltage is default
Cpu multiplier at 250x10
Mem div at 0.83, so memory at 208
HTT multiplier is 4x making HT run at 1000mhz

Any suggestions??

 

[Killmenow]

If Prime 95 fails.....bottom line is your computer isnt 100% stable..........sooner or later, youll pay the price :evil:

Anyways, some people say that failing P95 has something to do with P95 not liking certain A64's........I would just try upping the voltage a tad bit...just to test if it has any affect on the time it takes for P95 to fail.........it it does, then your computer is simply unstable at 2.5Ghz w 1.55V.

 

[theMan]

run memtest. what p95 test are you running, blend? you should use small FFTs

 

[SamzAthlon]

Memtest ran fine for 2.5 hours then I quit it.

Its the p95 which fails at 1.5 hours and yeah Im using blend torture test.

 

[lifeguard1999]

Try upping the memory voltage to see if that helps.

 

[SamzAthlon]

atm im p95ing at 2.49ghz which sets my HT at 996. I think before with 250x4 and HT at 1000 I was walking on a fine line. So far p95 at blend is going smooth for 1 hour...lol

I dont think mem volt will do anything since my memory is stable with memtest

By the way Im still not sure which torture test for 12 hours proves stability?

 

[Fern]

Memtest ran fine for 2.5 hours then I quit it.

That ain't long enough to prove stability. You need 12 - 24hrs depending on your patience

Fern