andrei3333
Senior member
Worked fine for 3 days
e8400
ga-p35-ds3l
2x1gb corsair 4-4-4-12
ocz stealthxstream 600w
7800gt
7200.11 hdd
installed xp, updated, uploaded some of my software, went into bios changes the memore timings to 4-4-4-12 and increased the option called DDr218 or something like that - from by +0.2 because it was showing 1.873V and my merory says 2.1 Volts
it worked rebooted, then it got stuck, i rebooted, then it got hung up again after a few minutes, now it keeps rebooting every 3 seconds, i tried clearing the bios by shorting the jumper with a screwdriver, and by removing the battery for about 10 seconds..and same thing, i turned off the PSU and looked at the MOBO, i dont see anything burnt
what to do now
e8400
ga-p35-ds3l
2x1gb corsair 4-4-4-12
ocz stealthxstream 600w
7800gt
7200.11 hdd
installed xp, updated, uploaded some of my software, went into bios changes the memore timings to 4-4-4-12 and increased the option called DDr218 or something like that - from by +0.2 because it was showing 1.873V and my merory says 2.1 Volts
it worked rebooted, then it got stuck, i rebooted, then it got hung up again after a few minutes, now it keeps rebooting every 3 seconds, i tried clearing the bios by shorting the jumper with a screwdriver, and by removing the battery for about 10 seconds..and same thing, i turned off the PSU and looked at the MOBO, i dont see anything burnt
what to do now