How exactly do I overclock my cpu, ram and video? I know it has to do with increasing the fsb and multiplier for cpu and ram.. and increasing core speed and memory speed for video.. but what incrememnts do i go buy, and what do i increase first.. multiplier or fsb.. can you tell me all the small things to do to overclock my system..
these are the options that i can change in my bios:
CPU Operating Speed
cpu fsb lock
ratio(fsb:agp;Pci) example: 4:2:1 or 3:2:1
Multiplier Factor
Speed Error Hold (on or off)
Cpu Power Supply
Core Voltage
I/O Voltage
DDR Voltage
DQ Control (center or edge dq)
cpu fast command decode(normal to ultra)
for DDR i can change
DRAM Clock (by SPD)
DRAM Timing (Manual)
DRAM CAS Latency (2.5)
Bank Interleave (enabled or disables)
Precharge to Active (Trp) .. (3T)
Active to Precharge(Tras) .. (6T)
DDR DQS input delay (auto or manual)
*Input Delay Value
DDR Output delay (Auto or manual)
*Output delay value
Command Drive Strength (Lo)
Dram Queue Depth (4 level)
Dram Command rate (2T Command)
DCLK Feedback Delay (Auto)
please post reply... thanks
these are the options that i can change in my bios:
CPU Operating Speed
cpu fsb lock
ratio(fsb:agp;Pci) example: 4:2:1 or 3:2:1
Multiplier Factor
Speed Error Hold (on or off)
Cpu Power Supply
Core Voltage
I/O Voltage
DDR Voltage
DQ Control (center or edge dq)
cpu fast command decode(normal to ultra)
for DDR i can change
DRAM Clock (by SPD)
DRAM Timing (Manual)
DRAM CAS Latency (2.5)
Bank Interleave (enabled or disables)
Precharge to Active (Trp) .. (3T)
Active to Precharge(Tras) .. (6T)
DDR DQS input delay (auto or manual)
*Input Delay Value
DDR Output delay (Auto or manual)
*Output delay value
Command Drive Strength (Lo)
Dram Queue Depth (4 level)
Dram Command rate (2T Command)
DCLK Feedback Delay (Auto)
please post reply... thanks
Facebook
Twitter