PCI problems with overclock

[B Lo]

Even with the PCI locked to 33.33, I experience problems when increasing the FSB past a 244. At 245 the wLAN recognizes networks, yet fails to connect to them. What might I do to alleviate this problem?

Running P4 520 (2.8) at 3.42Ghz on Abit AA8Duramax w/ 512MB PC2-5400 at 4-4-4-10 timing

PCI card is Linksys Wireless G PCI adaptor

Thanks!

 

[B Lo]

B+U+M+P = BUMP

 

[B Lo]

B+U+M+P = BUMP

 

[JohnAn2112]

Have you tried using another PCI slot?

 

[BigBadBiologist]

I've seen some reviewers say that the PCI locks on the motherboards using the latest intel chipsets may not be wroking as well as the PCI locks on the 865/875 chipset boards. You may just be out of luck. One thing to try is see if there are newer drivers for the LAN chip.

Here's a round up with a bunch of boards that show you typical FSB OCs:
http://www.anandtech.com/mb/showdoc.aspx?i=2293

 

[B Lo]

No, I didn't think to try a different PCI slot. That's a good idea. Maybe it's just a fluke with the one its in. Thanks!