PCI-E Voltage problem

[jgravance]

I have an Abit kn9-sli and in my abit eq it says my pci-e voltage is at 1.54v and the threshold is 1.08~1.32v and it is giving me a warning. Is this a normal pci-e voltage and maybe my threshold is set wrong, or is there a problem here. If so, any suggestions?

 

[airhendrix13]

I think mine is set at 1.4. Go into your BIOS and reset everything to defaults and see if that changes that voltage. If you OC using software, sometimes it can change voltages without telling you.

How long have you been running at this voltage?

 

[PurdueRy]

It's most likely wrong

 

[jgravance]

I just installed this motherboard, everything is stock, no OCing.

 

[airhendrix13]

Yeah, it could be wrong. Try another application that will show your voltages and see if you get different results.

 

[PurdueRy]

Originally posted by: jgravance
I just installed this motherboard, everything is stock, no OCing.

The ONLY way to get decently reliable results is to use a Volt Meter. Measuring the PCI-E bus voltage would still be difficult to get to however. Honestly, I would just assume its ok as long as you are not getting any sort of faults/failures