• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Patch or Plug?

Patches are better but plugs are cheaper. I've had 2 tires plugged now and haven't had any problems.
 
Originally posted by: Savij
<div class="FTQUOTE"><begin quote>Originally posted by: Linux23
Which is better and why?</end quote></div>

Are we talking cars or hair?

Car tires. 😉
 
My rear tire got plugged. It looks really ghetto and I have my doubts but so far it's holding up. I'm not one to appreciate half-assed repairs.
 
Plugging a tire may be ok for an emergency fix, but I'd have it patched (if possible) once I could get to a tire shop. I've seen plugs fail too many times before, (either fail to completely seal the leak, or just not stay in the tire) while IF the tire is repairable, the patch will do a much better job, and is more reliable.


"Hey y'all, I got me a flat tar here...let's slick up a piece of rubber and see if we kin git it to fill the hole if'n we glue it in thar..."
 
Plugs can develope slow leaks over time and must be redone. Not often but it does happen.

Patches leave the ply area inside the hole open to water that can corrode the steel wires that the plies are made of. This can cause a weak spot but generally the tire is worn out before it will become dangerous.
Large holes that are just patched can offer the opprotunity for water hydralic damage from driving at high speeds over very wet roads. This can lead to the above condition only faster or cause a tread seperation.

The very best is to use a patch that has a plug in its center. The plug is pulled through as the patch bonds to the inside of the tire. Tubeless tire repair for OTR trucks is done with these types of plug-patches.

The best,imho, for home, are the solid rubber plugs properly installed. I mark the rim inorder to locate the plug for inspection if a tire is ever found running low air pressure.

I do not care for cord type plugs but have used them with success.


Tube type tires, like most spoked wheels use, should have the tube patched/inspected and the tire must be patched to prevent water from entering the tube/rim area. This water will cause the tube to bond to the tire(overtime) and cause the rim to corrode, be it steel or alloy.

Street M/C tubes should never be patched twice.

I did not check any pole.😀
 
Back
Top