PAT / RAM problem: IS7-E / KHX PC4000 / P4 2.4c

[trueimage]

I can't seem to get pat working. I have it set on NBS800 and 1:1 ratio. Also, this was sold to me as 2x 512mb Kingston HyperX PC4000... Why does it say PC3200 in CPU-Z?

What should my DRAM / AGP volatges be? It should be stock at 250mhz for the ram. Also the prev owner of this cpu said 3.0 at default voltage, but I dont mind bumping one or two times to get 3.0.

The main concern is the PC3200 rating in CPU-Z??? and NO PAT! I wanna get the most out of this system as possible.

Look at my CPU-Z 1.22 info here

IS7 users help me out here (or Abit 865/875 in general!)

thanks

 

[myocardia]

The IS7 won't run at 250fsb and 1:1 memory ratio. No matter what memory is used, you have to use a 5:4 memory ratio. Oh, and Thugs won't be around until about 11 or 12pm, but that's what he said in a thread a day or two ago about the IS7. I'll look for it, and edit in a link to it, if I find it.

 

[Corporate Thug]

Originally posted by: myocardia
The IS7 won't run at 250fsb and 1:1 memory ratio. No matter what memory is used, you have to use a 5:4 memory ratio. Oh, and Thugs won't be around until about 11 or 12pm, but that's what he said in a thread a day or two ago about the IS7. I'll look for it, and edit in a link to it, if I find it.

why is that?

i dont have a problem running at 250mhz 1:1

 

[dp004i]

Mine boots and runs prime95 at 250 & 1:1, but I'm getting graphics corruption in games. My video card is fine, so I'm not quite sure what is going on.

 

[THUGSROOK]

DP

 

[myocardia]

Well, I never found that link. Maybe it wasn't Thugsrook that said it, but I sure thought that it was. Anyway, this will serve as a bump for you, so it will be at the top when he gets here.

 

[THUGSROOK]

Originally posted by: myocardia
The IS7 won't run at 250fsb and 1:1 memory ratio. No matter what memory is used, you have to use a 5:4 memory ratio. Oh, and Thugs won't be around until about 11 or 12pm, but that's what he said in a thread a day or two ago about the IS7. I'll look for it, and edit in a link to it, if I find it.

hehe~ actually thats not what i said

ok here's the deal....
you are using a springdale, it cant run PAT while overclocked past 200fsb.
however, there is a tweak that can enable PAT past 200fsb/overclocked.
set NBS to 667 and 1:1
...you may need to set GAT to A-A-A-D-D for this to work. those are the "lame" settings ~ tweak it later.

weather or not it will work for your ram..... i donno

let us know how it goes

 

[THUGSROOK]

and also.....

Dram 2.8v
vagp 1.6v

those are good settings to start with.