• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

P8P67 PRO bites the dust... did it take my CPU along for the ride?

H

hyprxtension

Member
The System:
Antec P182
i5-2500K (oc'ed turbo boost to 4.4ghz)
Thermalright Ultra 120 Extreme
G.Skill DDR3 1600 (2 x 4gb)
P8P67 PRO (rev3) --> P8Z68-V/GEN3
Corsair HX520

Probably not exactly thinking straight after spending a sleepless night trying to decipher this issue, but I'll try my best to explain in hopes that one of you has the answer... 🙂
Woke up yesterday and my desktop had shut itself off during the night (had left it up to convert a video for eventual youtube upload). Hitting power results in a quick 1/2 second spin of the fans, blinking of the CPU & MEMOK LEDs, and then nothing until the PSU is switched off and on again. Went through all the usual troubleshooting steps (disconnect all drives / cards, reset CMOS, take out battery, reseat CPU/RAM, boot with just one DIMM... though a bit cynically, since this system had been running fine for almost a year) and hit up the interwebs to see post upon post of dead P8P67s, most disturbingly: http://www.techpowerup.com/forums/showthread.php?t=153835

Went out to Microcenter and picked up a P8Z68-V/GEN3 as a replacement to try out -- hooked it all up and this time had power to fans/drives. CPU_LED blinks red momentarily and clears, followed by the MEMOK_LED, which stays solid red. No amount of CMOS clears / RAM reseats / MEMOK button pressed resolved the issue... so I tried another stick of DDR3 from a working system and had the same problem, so I ruled out memory. Maybe my Corsair PSU's on its last legs... (~5 years now)?

This one's got me stumped as to what it could be -- my gut is saying it's the processor [doesn't help that there's plenty of threads out there with people describing dead 2600ks from P8P67s], but I don't have another one on-hand to try (and returning a CPU to Microcenter is a nightmare). Heading back out to Microcenter again today... and wondering if I should:
a) Swap the motherboard for another P8Z68-V/GEN3 in case I just got a lemon?
b) Pick up a (gulp) 2500K in case my current one is dead?
c) Forget the Asus boards and get something else?


Any help/advice is greatly appreciated -- many thanks in advance.
 
Although it's possible the original board took out the cpu it's also possible the power supply failed and the original board is OK. It's also possible the power supply failed and took out the motherboard and cpu also. Need to do more troubleshooting.

Maybe take your replacement board to Microcenter with your cpu and have them test it? Or hunt down another power supply to test it?
 
hyprxtension said:
well, to all the googlers out there who want to find out how this story ends:
My P8P67 Pro went south and killed my 2500K in the process. Tried out a new 2500K in the P8Z68-V/Gen3 and it booted up without a hitch.

For reference: http://www.techpowerup.com/forums/showthread.php?t=155296
This is exactly what happened to me... same symptoms, same outcome.
Click to expand...

Just wanted to echo your experience, I had the exact same symptoms and end result. One fried mobo and one dead CPU. Same brand and type of mobo and CPU by the way.
 
I just hope what ever issue it was that it was resolved in the newer revisions D:
 
I cannot believe how much ASUS screwed the pooch on their P67 line. Ouch.

Having a pretty motherboard and pretty UEFI are not that useful when your hardware dies and takes out other hardware with it. ><
 
Sorry to hear about that happening. Hopefully everything gets worked out. Isn't your P8P67 Pro still under warranty?
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top