- Jan 30, 2007
- 30
- 0
- 0
AIBooster & CPU-Z show voltage as 1.26 under 100% load and 1.28V idle. I set it to 1.3125V in BIOS.
FSB
RAM-1:1,Speed-3333=370x9. Mushkin HP2 RAM 4-5-4-11@2.1V.
Bios 1707.
In BIOS, SpeedStep-disabled, virtualization-enabled, hyperpath3-disabled, enhanced memory map-enabled, dram throttling-disabled, C1control-disabled, microcode update-enabled.
Vmch - 1.55V
My orthos blend test fails 15mins when temps reach 62C on 100% load. Do I have to hike the Vcore? It seems silly at this bus speed. It was fine at 368 and 1.3V.
BIOS tells me that by enabling cpu ratio setting, the EIST will be automatically disabled. I noticed that Everest Ultimate reports in its CPUID that EIST has been enabled. I am surprised. Is this the reason?
Is there anything else I need to do?
FSB
Bios 1707.
In BIOS, SpeedStep-disabled, virtualization-enabled, hyperpath3-disabled, enhanced memory map-enabled, dram throttling-disabled, C1control-disabled, microcode update-enabled.
Vmch - 1.55V
My orthos blend test fails 15mins when temps reach 62C on 100% load. Do I have to hike the Vcore? It seems silly at this bus speed. It was fine at 368 and 1.3V.
BIOS tells me that by enabling cpu ratio setting, the EIST will be automatically disabled. I noticed that Everest Ultimate reports in its CPUID that EIST has been enabled. I am surprised. Is this the reason?
Is there anything else I need to do?