• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

p5q-pro won't go sleep

A

aartie

Junior Member
My system won?t go in sleep mode. in S3 will like went in sleep mode for like 2-3 sec and then reboot again .in S1 will go in sleep mode but the ALL fans still working
What I should look for too fix that?
ps.yes i can wake computer (in S1 mode) by mouse or keyboard
yes i try " Vista Tutorial - Power Options and Sleep Mode Problems " and all look OK

Motherboard -Asus PQ5-Pro bios version 2002
VGA - ASUS EAH4870 DK
E8500
8 gb OCZ Reaper HPC 1066 Mhz
Velociraptor WD 300GB
Two WD3200AAJS in raid0
Asus DRW-20B1LT
64 ultimate
 
First thing you should do is this.

1. Save your current BIOS setting so that you can restore it later.
2. Set your BIOS to "Optimized default".
3. Reboot, and configure the BIOS with bare minimum. I.E. if you have RAID or such, you will need to have it enabled so you can boot into the OS. Leave everything else at its default. (NO OVERCLOCKING)
4. Disconnect as many external devices as possible. Printers, network cables, card readers, etc.
5. Reboot and see if S3 works.

The obvious goal here is to see if your board is capable of S3.
 
Originally posted by: lopri


The obvious goal here is to see if your board is capable of S3.
Click to expand...

Yes !!! that was so simple .....jumper USBPW1-4 on MB was set too pin 1-2 ( I change to 2-3 )
sleep mode is working
thanx
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top