I just assembled the following system:
Asus P180
Corsair 620W PSU
Q6600
Tuniq Tower 120
Asus P5K Premium
4x2GB Patriot PC6400 RAM
Evga 8800Ultra
4x750GB Seagate SATA drives
PX760A DVD Burner
On first power up I'm getting a continuous tone and nothing else. Not beeping, but a continuous, never ending tone.
I've tried placing a single stick of memory in slot A1 and also tried removing BIOS battery for several minutes / setting the jumper to the "clear" position.
Both 24-pin and 6-pin power connectors are attached. 6-pin PCIE cable from PSU is attached to graphics card.
Any suggestions? This is the first system I've tried to assemble so please be kind.
Thanks.
Asus P180
Corsair 620W PSU
Q6600
Tuniq Tower 120
Asus P5K Premium
4x2GB Patriot PC6400 RAM
Evga 8800Ultra
4x750GB Seagate SATA drives
PX760A DVD Burner
On first power up I'm getting a continuous tone and nothing else. Not beeping, but a continuous, never ending tone.
I've tried placing a single stick of memory in slot A1 and also tried removing BIOS battery for several minutes / setting the jumper to the "clear" position.
Both 24-pin and 6-pin power connectors are attached. 6-pin PCIE cable from PSU is attached to graphics card.
Any suggestions? This is the first system I've tried to assemble so please be kind.
Thanks.