p4p800....problems

[jaa1984]

1. i also have and all in wonder 9700 pro version xxx-xxxxx-10 and i have problem with the monitor.....it doesnt like to start up the first time i turn on the pc....but it will when i turn it off and turn it back on.

2. bios keeps telling me i failed to over clock when all the default settings are applied. to be more specific, it says: "failed to over-clock!! pres f1 to enter setup or press f2 to restore defaults and continue." keep in mind it tells me this even though it has default settings. everytime i start it up.....

3. pc doesnt restart, it'll shut down windows but will never restart. it just hangs with the monitor off. i believe this has to do with the 3d card also, but who knows.


any takers? help? etc.?

 

[butch84]

im not sure what your exact problem is, but you may want to go to www.asus.com, then click on "contact us" on the top left. You can file a case in the asushelpdesk which i have found is pretty useful. Plus you need to get a case number from the helpdesk before you can call tecksupport anyway.

good luck 🙂

butch

 

[BadThad]

Do you have the latest BIOS? What ram do you have, what slots you using and at what voltage? What cpu and fsb?

A quick thing to try is to increase your RAM voltage to 2.7v...but that may not be your problem, we need more info.

 

[jaa1984]

i have the latest bios, 1.009 beta, still had these problems with the other versions.

i have 512 kingston pc2100, and i have 256 of some kind which i dont know because it was given to me. i just got this stuff for free so i figured i'd use it for now.

im using the first slots on both 2 dimm sets....so the blue slots.

i have the voltage set to default since it's all i can have it set at, since it continually tells me im trying to overclock, though im not.

i have a p4 1.6ghz 400mhz fsb, this was also given to me.

i plan to do some upgrading, hence why i bought the mother board. but i need money for that, so until i can, i'll have to deal with this....