p4b533-e

[rsrvoir]

Sorry if this isn't exactly the most suitable place for this post, but as far as I can tell, this is where the most knowledgeable people are.
I just ordered everything for a new system. Got an asus p4b533-e, a 1.6a, and an antec true430 psu. Plugged it all in with stock hs/f and artic silver 3. One green light comes on indicating the board has standby power, but that's it. No fans will spin, nothing. I've tried about 4 different psu's with no luck. The antec I have has successfully run 4 other machines, one of which was a P4, so the atx12v line is working fine too. Anyone else had this happen before? All help appreciated...appreciated greatly.

 

[Mikki]

Sorry, have to ask, are you sure you have the power switch connector and psu connectors connected to the mobo correctly? If you have the light, that means power is getting to the mobo, so it sorta sounds like it's something with the power switch or the mobo itself. HTH

 

[rsrvoir]

Thanks Mikki.
Dang. Figured it out, feel like an a#@. The power connection was off by 90 degrees. Guess I mis-read the manual. At least it's working though. Thanks again.

 

[Mikki]

Doesn't matter, you got it working and that's what counts! Woohoo!
Good luck with that -E!!