P4 1.6A and 1.8A overclocking: Post your results

[ahsia]

Which motherboard? FSB, DRAM, and voltage settings? How high have your overclocked it? Where did you buy it from?

 

[paralazarguer]

ugh...hasn't this exact same thread in one form or another already been posted 20 times in as many days?

 

[Barrei]

p4 1.8a @2682 mhz , cpuv @ 1.75 , 149 fsb, 512 pc2700 sammy , GA 8irxp mobo.

 

[n18mets]

1.6A@2.13 Mhz

My Abit IT7 Max will not boot at anything above 133 Mhz FSB. I've heard that there are jumpers on my motherboard that will allow higher voltage, but I have not been able to identify them.

 

[Mad Pierre]

1.8A at 2185 @ 1.625 Volts

 

[Renob]

1.6a @ 2400mhz at 1.75 volts. Asus P4B533 Corsair 2700 XMS

 

[Blargh]

1.8a @ 2.4ghz, 1.525 vcore, asus p4t533-c , 512mb samsung pc800 rdram

Could go higher on the cpu. but im limited by my ram right now.... which like refuses to do anything over pc800 stably

 

[Rusman]

P41.6a @ 2.4GHz, 1.5v, Samsung PC2700 DDR
These are on an Asus P4S533, all parts from NewEgg.

This is the highest I've overclocked so far.

 

[Jgtdragon]

I got a dud! Oh Well.
1.8a@2258 w/ 1.625v using Rdram 125 x4x2 = Pc1000.
This chip won't do 2.4Ghz.
Got it from zbuy.com with pack date of 12/27/01.

 

[gsethi]

Here is my system:

CPU: 1.60a @ 2.60 Ghz
CPU VCore: 1.800 v
Memory: Samsung DDR 333 @ DDR 435
Dram Voltage: 2.800 v
Cooling: Thermaltake Dragon 478 @ ~4500 rpm

 

[SSGTi]

p4 1.8a @ 2.5ghz
1.65 vcore
retail heatsink/fan with no extra cooling.
super quiet system

 

[FatClemenza]

P4 1.6a @ 2560 mhz cpuv @ 1.77, 160 fsb, 512 mb Samsung pc800 rdram ( at x300), ABit TH7-IIR, Zalman CNPS 5500-cu HSF. CPU purchased from Newegg.

 

[pvhk]

pIV1.6A@2.4 vcore 1.55 , p4b533, 2 256Mo DDR2700 samsung rev.D. using box HSF

 

[ahsia]

I ask only because I am selling my 1.6A with the Gigabyte 8SRX to my friend, and getting a EPoX 4G4A+ with either the 1.6A or 1.8A. I usually buy from newegg, and I read on a few threads that newegg have sold some duds lately. Please continue to post your results, especially those who recently purchase your P4 setup (also include pack date and location if possible). Thanks!

 

[TimeKeeper]

refurb ABIT BD7 (from newegg)
Retail 1.6a@2.0 @1.55V w/ 512MB Crucial Value PC2100
Like to keep it cool and all most DEAD silent. 48C/41C
(I have Mod Quadro2 PRO w/o fan, 2 7200rpm HD, CD, CDRW....... all in midtower case only w/out extra case fan)

 

[BAMAVOO]

^^^
And they called you DUMB DUMB

 

[AznRyda]

1.6a @ 160fsb 4:5 ratio abit bg7 5/16 packdate corsair xms pc2700

 

[Duvie]

Newegg sold some duds!!! C'mon....They are no gaurantees when it comes to ocing...If iit runs at default speed intel has met its obligation....It is all about a little luck...

1.6@2.67ghz (167fsb) 334mhz ddr at 1.66v on a Epox 4bda...
1.6@2.72ghz (170fsb) 340mhz ddr at 1.69v prime tested
1.6@2.80ghz (180fsb) 360mhz ddr at 1.74v loaded windows ran benchmarks and appz (not prime tested)
1.6@2.88ghz (185fsb) 370mhz ddr at 1.79v loaded windows ran benchmarks and appz (not prime tested)


The last 2 likely would require a bit more voltage (+.05-.075v) to be prime stable...I don't like the temps at this stage and with my current cooler....

Pack date 5/16/2002 Costa Rica from NEWEGG!!!!

 

[aceO07]

P4B533-V, 150fsb, samsung pc2700 512MB at ddr375, cpu 1.6v ram 2.6v, 2.4ghz stable (haven't tested higher). Bought everything from newegg.com expect motherboard (ajump.com).

 

[Showtime]

2.35 @1.6volts. fsb 145(i think). msi ultra645 so i need to do the wire short for more voltage.

 

[P4spooky]

1.6A @ 2.4GHz (VCore 1.55) --> Newegg
Memory: DDR 375 (Corsair XMS PC3200) 4:5 Divider, VDimm: 2.6V --> Newegg
MB: Epox 4G4A+ (Rocks BTW, IMHO) --> MWave
Alpha 8942T with Sanyo Denki 53CFM
Rock Stable: Prime 95 (24Hrs). CPU Temps: 38 (Idle), 44 (Full Load)

 

[GRIFFIN1]

EPOX 4G4A+ (mwave.com)
1.6A @ 2.56 with slight voltage increase (mwave.com)
DDR 400 - 256 meg Kingston PC3200 seems to need a slight voltage increase (googlegear.com) (another one is on the way now)

The 300 watt Enlight power supply in my in my Enlight case makes me a little nervous. When the CPU is working at 100%, I can actually hear the power supply fan slow down. I've had one reboot that I think was due to the power supply, so I ordered a new 420 watt from directron.com. It was also starting to smell like it was getting too hot. Untill the new power supply gets here, I've decided to run everything at default.

Full load CPU temp is 54C with the retail HS. Is this too high?

Pack date 5/16/02 Costa Rica.

 

[edwardhchan]

1.8A (2/11/02 pack date), Abit BG7, Hynix PC2100 RAM (bleh)...

2.4GHz/133 @ 1.625V, and the quietest machine I've ever owned! Using the new CoolerMaster IHC-H71 silent cooler and Enermax quiet power supply... Full load runs at 56C... not terribly good, but within spec, so I'll take a bit of heat for a quiet machine. The way I see it, I got a 2.4GHz proc for $165!

Ed

{edit} -- Oh yeah, quiet seagate drives too

 

[GrumpyMan]

1.6 @ 2.4/4X Rdram on an Asus P4-Te, stock voltage and hsf.

 

[SupermanCK]

LOTZ More 1.6A results