overclocked geforce won't apply at startup

[faye]

Hi, just overclocked my old geforce sdr.

i set a new value of mem and core clock.

i've checked the "apply setting at startup".

i reboot, but the value is back to default after startup.

in msconfig/startup, i don't see any NV... settings.

afterall , what should i do?

thanks

 

[N2Ohyeah]

First, go out and buy a cheap ass GF4-MX440.

There you go. All fixed

Try RivaTuner... ive had good luck with that.

 

[faye]

N2Ohyeah, did it flick rite at the Windows start?

if u r using CRT monitor, did it flash(static) rite at the beginning when Windows start?

 

[mtnbikerjeremiah]

Sounds like to me that you are using the latest Detonator drivers, say the 40.72's and the associated patch for it located at www.guru3d.com.

If you want your settings to stay, they will for Detonator drivers 30.xx and below, however for anything higher it seems to be a good idea to use Power Strip 3.26 at http://www.entechtaiwan.com/. You would need to check mark in the setup for Power Strip restore settings at startup, meaning that the overclocked settings will stay with you when you restart.

I hope this helps dude..