Over clocking a Dell

T_Yamamoto

Lifer
Jul 6, 2011
15,007
795
126
I have a E2140 which can easily do a 100% over clock. I tried setfsb but gave me bsod when I tried it
 

JWade

Diamond Member
Oct 9, 1999
3,273
197
106
www.heatware.com
you might be able to do a pin-mod (well not really a pin-mod since the processor doesnt have pins, but still the same concept) to up the FSB. I know this has been done to q6600 processors, i dont see why it couldnt be done to others.
 

borisvodofsky

Diamond Member
Feb 12, 2010
3,606
0
0
you might be able to do a pin-mod (well not really a pin-mod since the processor doesnt have pins, but still the same concept) to up the FSB. I know this has been done to q6600 processors, i dont see why it couldnt be done to others.

this will just end badly. :eek:
 

pantsaregood

Senior member
Feb 13, 2011
993
37
91
I advise you take what I say with extreme caution.

Some OEM boards are extremely similar to retail motherboards. Several Acer, HP, and Gateway models from a few years ago used a board based on the Abit NF-M2S. I had an Acer Aspire T180 rig that had been sitting around for a while, and bricking it wasn't really a concern. I flashed the retail Abit BIOS and suddenly I had complete access to normal BIOS options. I had to use modbin to manually unlock the voltage controls, but it did allow me to push a 3800+ up to 2.7 GHz.

In retrospect, it wasn't really worth it because that 3800+ Orleans didn't overclock well at all.

That said, good luck finding what board your Dell is based on. I wouldn't bother with programs like SetFSB because they add overhead to your system that negates part of the improvement from overclocking.
 

dma0991

Platinum Member
Mar 17, 2011
2,723
1
0
Kinda reminds me of the pencil trick I did with my old Socket A AMD Athlon.
 

Kenmitch

Diamond Member
Oct 10, 1999
8,505
2,250
136
Did that to an HP with an E3300 or somthing like that. Worked like a charm. too bad overcock.net is a shithole.

The only one I did was a Dell laptop with a Pentuim M S479 upped the fsb to get 2ghz out of the chip. Back then pins were on the chip so one had to bend a itty bitty tiny wire to place in the socket. :)

image7.jpg


Kinda reminds me of the pencil trick I did with my old Socket A AMD Athlon.

For the younger generation who has no idea what your talking about :)

http://www.tomshardware.com/reviews/overclocking-amd,208.html
 
Last edited:

borisvodofsky

Diamond Member
Feb 12, 2010
3,606
0
0
The only one I did was a Dell laptop with a Pentuim M S479 upped the fsb to get 2ghz out of the chip. Back then pins were on the chip so one had to bend a itty bitty tiny wire to place in the socket. :)

image7.jpg




For the younger generation who has no idea what your talking about :)

http://www.tomshardware.com/reviews/overclocking-amd,208.html

OH god, I remember that, the older kids were doing it. I didn't have amd at the time. It was a PAIN IN THE ASS. he had to remount cooler each and every time. D:
 

MustangSVT

Lifer
Oct 7, 2000
11,554
12
81
i remember doing pencil on my amd. but after few weeks I always had to draw the line again.
 

Phynaz

Lifer
Mar 13, 2006
10,140
819
126
Your Dell is in cahoots with your parents. It will gladly overclock for you when you get a job.