outbound policy-map not matching packets

[funkbass81]

i have an outbound policy map on my serial interface that isn't matching packets. I'm using nbar to classify the traffic



this is what i get when i do a sh pol-map int serial0/0


sh policy-map interface serial 0/0/0
Serial0/0/0

Service-policy output: qos

Class-map: p2p (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol edonkey
Match: protocol fasttrack
Match: protocol gnutella
Match: protocol kazaa2
Match: protocol napster
Match: protocol irc
Match: protocol winmx
drop

Class-map: business (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol http
Match: protocol ipsec
Match: protocol imap
Match: protocol notes
Match: protocol pop3
Match: protocol citrix ica-tag "1"
Match: protocol ftp
Match: protocol secure-ftp
Match: protocol secure-http
Match: protocol secure-imap
Match: protocol secure-pop3
Match: protocol smtp
Queueing
Output Queue: Conversation 265
Bandwidth 65 (%)
Bandwidth 1003 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
QoS Set
dscp af43
Packets marked 0

Class-map: class-default (match-any)
130594 packets, 32103074 bytes
5 minute offered rate 230000 bps, drop rate 0 bps
Match: any


any help is appreciated

 

[jlazzaro]

post your actual config.

 

[funkbass81]

figured it out, switched the class-map from match all to match any