Ordered pc off newegg arrives today!

[EffeX]

Ok so i ordered a x2 4400 and a 7900GTX and some other stuff. I need to know if theres any hard parts about your first build because my dad went ou tof town so im all alone on this...
Ive read guide after guide but tomorrow is the real thing.

 

[RallyMaster]

To tell you the truth, this computer is actually my first REAL build. I've taken computers apart before so I know what is going on inside the computer but all I can say is: "The computer is a big jigsaw puzzle. Solve it and you can play on it." The hardest part may actually be the cabling. If you don't have a sense of order, your computer's airflow won't be great and it will look like a nuclear bomb just exploded inside your case with wires going everywhere.

 

[rkfrompk]

im actually building my first computer too. i got all the parts but made a mistake buying teh case and ended up getting a cheap case with a ****** power supply and no manual. Putting it together was also hell cuz it didnt come with enough standoffs to elevate the motherboard so i had to improvise a bit. Ordered a new power supply which is comin on friday

a mistake i made was not paying attention to the rails on the power supply. figure out the rails and voltage crap on your supply rather than just looking for decent wattage.

 

[EffeX]

Thanks for the advice, I bought a seasonic so I should be covered...

 

[thescreensavers]

remeber Stands offs and good you got a good PSu

 

[pkme2]

Really super choice on PSU.

 

[EffeX]

Thank you guys Ive been reading about building pcs since january im just scared I guess.....I dont want it to blow up or anything. Oh yeah I almost forgot my case has a totally removeable tray with the slots and all....should i put the mobo on it first and then attach the other components??

 

[CalvinHobbes]

If my case has a removable tray, I install everything outside of the case. Some things are easier to install outside of the case.

 

[EffeX]

Yeah I know, but the guides say attach the ram and cpu to the board then install onto tray but couldnt I install the board to the tray first then put the stuff on it???

 

[Sniper82]

Originally posted by: EffeX
Yeah I know, but the guides say attach the ram and cpu to the board then install onto tray but couldnt I install the board to the tray first then put the stuff on it???

You can add the memory and CPU before you put it on the tray since they ain't in the way but I've done it both ways and it can be done either way you think is easier on you. I always install the cooler on the CPU after putting the mobo in though because it just adds weight to it if you was to drop the board by mistake.

The hardest part IMO(and it ain't even really that hard with the mobo manual) is connecting the cables from the case to the mobo. Really building the computer is the easy part. I think the hardest part is already over for you which is picking the parts out. I had a awful time last year trying to decide which PSU to go with. The biggest mistake you can make though is forgetting to put the CPU heatsink on before turning your PC on.

Now if you get it together and the system doesn't come on or doesn't post. Thats a whole different topic.

 

[m1ldslide1]

I second that you should remove the tray and assemble it all together externally. You should be able to figure it out by just getting after it. Just make sure you're very very careful with the standoff placing - if you misalign one and have it contacting the traces under your Mobo it will fry and you will cry. I'm able to eyeball it just fine nowadays, but on my first few builds I used a marker to make sure I put the standoffs into the right holes. Now I use the simple formula: nine screwholes on the Mobo, set aside nine standoffs. Put them in where they go, and set the mobo on top of them and make sure you can see the standoffs through the holes and you're good to go.

Also I'd make sure you put your 12V rail with the highest amp rating on the video card. Also be careful installing the CPU - it is keyed and will only seat one way, so don't force it. Aside from whatever thermal grease you're using, that should be about it.

Good luck. :thumbsup:

 

[MrChad]

http://www.mechbgon.com/build/index.html

One of the better guides out there, written by AT Forums' own mechBgon.

 

[EffeX]

Ive read it 3 times... Im pretty sure I can do this. I'll let you guys know how it turns out.

 

[DJCrunkMix]

Yay! Whats up guys... I am building for the first time too ... my parts are arriving today !!!

Click the link on my sig to see what parts I have ordered... Oh man... can't wait to see that x1900xt running . I will update you guys with any issues that come up and make sure that us n00bs dont make the mistake again .

 

[Noema]

Originally posted by: MrChad
http://www.mechbgon.com/build/index.html

One of the better guides out there, written by AT Forums' own mechBgon.

:thumbsup:

It's an excellent guide.

You'll be fine in your first build, as long as you use common sense (ie, don't scrub your CPU against a carpet or stuff like that ).

And have fun doing it!! In my opinion, there are few things as cool as building your own computer. The sense of exhilarating joy and pride one feels after it boots up for the first time is second to none. You'll never be able to buy a pre-built again.

Heck, I sometimes feel like 'accidentaly' wrecking my current rig just so I have an excuse to build another one :laugh:

 

[DJCrunkMix]

Originally posted by: Noema

Originally posted by: MrChad
http://www.mechbgon.com/build/index.html

One of the better guides out there, written by AT Forums' own mechBgon.

:thumbsup:

It's an excellent guide.

You'll be fine in your first build, as long as you use common sense (ie, don't work on a carpet ).

whats wrong with working on a carpet? the pc ain't gonna sh!t.

 

[Noema]

Originally posted by: DJCrunkMix

Originally posted by: Noema

Originally posted by: MrChad
http://www.mechbgon.com/build/index.html

One of the better guides out there, written by AT Forums' own mechBgon.

:thumbsup:

It's an excellent guide.

You'll be fine in your first build, as long as you use common sense (ie, don't work on a carpet ).

whats wrong with working on a carpet? the pc ain't gonna sh!t.

I edited my post for more clarity.

Working on a carpet is something I don't recommend as walking on the carpet can charge your body with static electricity. Something you don't want when handling delicate and expensive computer components. Here's some good info for first time builders.

The kitchen is my favorite place for working on my PC since it is well lit and I can discharge myself of static electricity by touching the sink.

 

[Tsuwamono]

Just be careful when your working. Try to touch the side of the case every time you go to touch another PCB. Also a really good thing to remember is to not put too many standoffs in. if you do you can blow your mobo

 

[fatpat268]

static electricity is what's wrong with working on a carpet

edit: meh, i'm slow.

 

[DJCrunkMix]

^^ good point but you can always discharge yourself by touching the case which happens everynow and then. I am always on my boxers so no chance of getting static.

True about getting that feeling of immense joy and pride!! I am gonna cry the first time I will see my boot screen... man... can't wait !!!

 

[EffeX]

I bought an ESD wristband can I work on carpet

 

[EffeX]

Anyone????

 

[Crizza]

Yes

 

[EffeX]

Originally posted by: Crizza
Yes

Cool, Thanks. Im still waiting for the ups man...grrr

 

[m1ldslide1]

Originally posted by: DJCrunkMix
^^ good point but you can always discharge yourself by touching the case q]

Touching your case will only discharge static electricity if it's grounded, in other words, if it's in direct metal contact with your PSU and your PSU is plugged into the wall. Touch your plumbing periodically. Or if you're going to use a wristband, make sure you wire it to the plumbing - exposed, non-painted metal pipes only! I did that once from my living room to my bathroom. It was kind of cool.

All that being said, I haven't heard of anybody frying components from electrostatic. At work we have some VERY expensive PCB's, so I always try to strap up to be on the safe side.