Opty 165 @ 2.7GHz at stock voltage

[imported_miahallen]

AMD Opteron 165 @ 2.7GHz w/ONLY 1.35V
Tt Big Typhoon, idle temp 35C, load temp 50C
2GB Patriot @ DDR386 2-3-2-5 T1
24hrs dual sp2004 stable

Screenshot

 

[starwars7]

That is awesome!! Did you use the stock HSF at all?

 

[Extelleron]

Bump it up to 1.45V or so

 

[imported_ST]

my x2 setup:

2465 MHz @ 1.15V
2610 MHz @ 1.20V
2755 MHz @ 1.26V
2900 MHz @ 1.39V

 

[imported_miahallen]

Originally posted by: starwars7
That is awesome!! Did you use the stock HSF at all?

Nope, wanted something quiet.

Bump it up to 1.45V or so

Nope, tring to keep the temps down. Plus, I only got it up to 2755 with 1.4V, not a big enough gain.

 

[imported_miahallen]

Originally posted by: ST
my x2 setup:

2465 MHz @ 1.15V
2610 MHz @ 1.20V
2755 MHz @ 1.26V
2900 MHz @ 1.39V

Those are great! I also ran mine stable at 2.4GHz with 1.2V...BTW, how do you like that Sceptre?

 

[imported_ST]

Originally posted by: miahallen

Originally posted by: ST
my x2 setup:

2465 MHz @ 1.15V
2610 MHz @ 1.20V
2755 MHz @ 1.26V
2900 MHz @ 1.39V

Those are great! I also ran mine stable at 2.4GHz with 1.2V...BTW, how do you like that Sceptre?

Sceptre is great in terms of a panel...but the ID (industrial design), remote, and some calibrations leave much to be desired. I am awaiting my 42" Sceptre LCD TV now to replace it.

btw> what's the stepping on ur CPU?

 

[imported_miahallen]

Originally posted by: ST
btw> what's the stepping on ur CPU?

CCBWE 0548XPMW

 

[F1shF4t]

my one is at 1.35v, well 1.375 set in bios, all progs report it as 1.34v, and bios reports as 1.36v 2.7ghz, been running for a month like this now.

 

[Thor86]

Originally posted by: ST
my x2 setup:

2465 MHz @ 1.15V
2610 MHz @ 1.20V
2755 MHz @ 1.26V
2900 MHz @ 1.39V

Nice! :beer:

What did you do for stability tests?

 

[imported_ST]

Originally posted by: Thor86

Originally posted by: ST
my x2 setup:

2465 MHz @ 1.15V
2610 MHz @ 1.20V
2755 MHz @ 1.26V
2900 MHz @ 1.39V

Nice! :beer:

What did you do for stability tests?

dual prime tests....basically all these settings were to test how best to enable Cool N Quiet with RMClock. I did it by knowing what I want for my max is fsb x multiplier (2900MHz = 290fsb x 10multi). I then set the VID to mimic the lowest value CnQ derives (1.1V) and test with different mutlipliers upwards accordingly. So basically those numbers are derived from:

290 x 8.5
290 x 9
290 x 9.5
290 x 10

I test the lowest possible voltage it can be dual prime stable at (usually 6 hours, although the 2900MHz was ran 30 hours) and set it accordingly in RMClock configs.

 

[themusgrat]

That is impressive. I have to give mine 1.575v to do 2.8.

 

[svsnow]

mine does 2700 on 1.35 as well....
but im using 2600 1.325

 

[Thor86]

Originally posted by: ST
dual prime tests....basically all these settings were to test how best to enable Cool N Quiet with RMClock. I did it by knowing what I want for my max is fsb x multiplier (2900MHz = 290fsb x 10multi). I then set the VID to mimic the lowest value CnQ derives (1.1V) and test with different mutlipliers upwards accordingly. So basically those numbers are derived from:

290 x 8.5
290 x 9
290 x 9.5
290 x 10

I test the lowest possible voltage it can be dual prime stable at (usually 6 hours, although the 2900MHz was ran 30 hours) and set it accordingly in RMClock configs.

Small or Large FFT tests?